{% extends "base.html" %} {% set active_page = "handbook" %} {% block title %}Handbook - Chapter 10: Secrets{% endblock %} {% block head %} {% endblock %} {% block content %}

Previous Top Next

Chapter 10: Secrets

The Judge has many responsibilities. Among these are to help explain, teach, and enforce the rules; to rule on “grey areas” not covered by the rules; to control the flow of information between the world and the players; to play the adversaries which confront the adventurers during play; and to choose or create the setting and adventures for play. This chapter focuses on how to construct settings and adventures that make use of the unique mechanics of ACKS.

Constructing the Campaign Setting

Judges running campaigns with the Adventurer Conqueror King System can either use a setting offered for the system, convert another campaign setting to ACKS, or create their own campaign setting. Making a campaign setting from scratch can be the most fun, if time is available to do so. The following section outlines the game mechanics of how to design or convert a campaign setting compatible with ACKS.

Mapping the Setting

The first step in constructing a campaign setting for ACKS is to create one or more maps of the regions where the player characters will adventure, conquer, and rule. ACKS assumes that the campaigns setting will be mapped using hex graph paper with 24-mile and 6-mile hexes. If the Judge is converting an existing fictional or real-world setting, he can use the setting’s map if it is already on correctly scaled hex paper or draw a new version.

If the Judge is creating a new campaign setting, he will need to create his own maps. When mapping the setting, the Judge should create two maps, one regional map representing the adventurers’ starting area and one campaign map representing the lands around it. The Judge does not need to chart the entire planet, however. Adventurers will spend most of their early careers moving between a town or village and only one or a few dungeons within several hundred miles. The Authors own campaign setting is about the size of our world’s Mediterranean region, and has been more than sufficient for even very high level characters.

A standard sheet of hex graph paper, 30 hexes wide and 40 hexes long, covers an area 1,200 hexes total. When creating the recommended two maps, one sheet of hex paper should be used with 24-mile hexes for the campaign map, while a second sheet should be used with 6-mile hexes for the regional map.

When creating his setting’s map(s), the Judge must consider many questions. Where are the shorelines? Is this area part of a continental land mass, or a series of islands? Next, he must decide on the climate and terrain. Is the climate temperate or tropical? Is the region mountainous, hilly, or flat? With these basic considerations made, mapping can begin. The Judge should take particular care to note the location of mountains, rivers, lakes, seas, and other types of terrain or features that can serve as trade routes or barriers.

Developing the Realms

Once the Judge has converted or created maps for his setting, the next step is to begin to develop the realms that will populate the maps. The two tables below create realms compatible with the ACKS domain mechanics. The Realms by Type table shows a number of different types of realms, ranging from lowly baronies to huge empires. For each type of realm, the table provides the realm’s population, the number of individual domains in the realm, and the size of the realm in square miles, 6-mile hexes, and 24-mile hexes. (Note that this data corresponds with the tiers shown in Titles of Nobility table in the Strongholds and Domains rules in Chapter 7). The Political Divisions of Realms table shows how many vassal realms of each type exist within a larger realm. If desired, each of these vassal realm can also be created using the Realms by Type table.

If the Judge is converting an existing fictional or real-world setting, he can guide this process using the any available information about the size of the setting’s realms (in square miles) and/or the population of the setting’s realms.

If the Judge is developing the realms for a setting of his own devising, he will have to construct the realms based on the maps he has created and his own imagination. Using the recommended two maps, the large-scale 24-mile hex campaign map should encompass a huge empire or several kingdoms, while the smaller scale 6-mile hex regional map should constitute a robust principality of about 18,000 square miles (600 hexes), leaving 50% of the map available as unsettled, wild land.

To assign appropriate populations to domains of a given size, a useful guideline is to assume an average population density of around 50 people per square mile, roughly equivalent to the ancient world during the Roman era. That represents 300 families per 6-mile hex, or 5,000 families per 24-mile hex.

Realms by Type

Type of Realm Realm Population (families) Realm Domains Realm Size (sq. miles) Realm Size (6-mile hexes) Realm Size (24-mile hexes)
Empire 1.5M - 11.6M+ 5,461-55,987 143,000-1,175,000+ 4,600-38,000+ 286-2,350+
Kingdom 364K - 2,000K 1,365-9,331 36,000-200,000 1,150-6,300 71-391
Principality 87K - 322K 341-1,555 8,775-32,500 280-1,050 18-65
Duchy 20,000 - 52,000 85-259 2,000-5,500 67-172 4-11
County 4,600 - 8,500 21-43 475-875 15-30 1-2
March 960 - 1,280 5-7 96-128 3-4 Less than 1
Barony 120-200 1 12-20 1 Less than 1

Political Divisions of Realms

Type of Realm Empires Kingdoms Principalities Duchies Counties Marches Baronies
Empire 1 4-6 16-36 64-216 256-1,296 1,024-7,776 4,096-46,656
Kingdom - 1 4-6 16-36 64-216 256-1,296 1,024-7,776
Principality - - 1 4-6 16-36 64-216 256-1,296
Duchy - - - 1 4-6 16-36 64-216
County - - - - 1 4-6 16-36
March - - - - - 1 4-6
Barony - - - - - - 1

Example: On the Judge’s campaign map, he has drawn a vast nation covering 1,130 24-mile hexes. This qualifies it as an “empire”. At the suggested 5,000 families per 24-mile hex, the empire has a population of 5.6 million families. Following the Political Divisions of Realms table, the Judge decides the empire is divided into 5 “exarchates” (kingdoms), each controlling 1.1 million families and spanning 226 24-mile hexes (113,000,000 square miles). He divides each exarchate into 6 “prefectures” (principalities), each controlling 183,000 families and spanning 37 24-mile hexes (18,500 square miles). He decides that he will further develop one of these prefectures as the starting region for the adventurers. His regional map should therefore assign the prefecture about 600 6-mile hexes of settled land (approximately 18,500 miles).

The Revenue by Realm Type table below shows the size of the personal domain of various tiers of nobility, their monthly income from domains, and their monthly income from urban settlements. The Revenue by Realm Type table assumes that at each tier of nobility, the nobles have 4-6 vassals of the next tier below them, who each hold a vassal realm, as per the Political Division of Realms. The Judge can use this chart to quickly decide the income and holdings of NPCs or vassals in a realm based on their size, population, or other factors. He can also use it to determine the value of very large player character realms by quickly selecting values for their vassal realms rather than creating them all.

Revenue by Realm Type

Type of Realm Ruler’s Personal Domain (families) Ruler’s Stronghold Value (gp) Realm Population (families) Domain Income/Month (in gp) Urban Income /Month (in gp)
Empire 12,500 720,000+ 1.5M - 11.6M+ 250,000-425,000+ 135,000-700,000+
Kingdom 12,500 480,000 364K - 2,000K 120,000-171,000 17,500-112,000
Principality 7,500 360,000 87K - 322K 50,000-66,000 3,450-15,000
Duchy 1,500 115,000 20,000 - 52,000 14,500-20,000 800-2,000
County 780 70,000 4,600 - 8,500 5,600-6,600 0
March 320 45,000 960 - 1,280 2,000-2,700 0
Barony 160 22,500 120-200 450-750 0

Example: The Judge needs to determine the realm of Lazar, an NPC Exarch of a southern Imperial province. He has already decided that the Southern province has a population of 3,000,000, which equates to 600,000 families. Reviewing the Realms by Type table, he sees this is about 30% of the maximum size of a Kingdom. Exactly 30% of 7,776 is 2,332.8; he decides that the Southern province will consist of 2,300 domains. On the Revenue by Realm Type table, he estimates that Exarch Lazar should earn about 140,000gp per month from his domains and another 25,000gp per month from various urban settlements.

Adjusting Population Density

As noted above, ACKS generally assumes an average population density of around 50 people per square mile. This is roughly equivalent to the ancient world during the Roman era. The size of the realm can be increased if the Judge wants a world with a lower population density is lower. Conversely the size of the realm can be decreased if the Judge wants a world with a higher population density.

Historical Era/Region Average Population Density Families per 6-mile Hex Families per 24-mile Hex
Medieval England 40 people / square mile 250 4,000
Ancient Rome 50 people / square mile 300 5,000
Classic Greece 80 people / square mile 500 8,000
Holy Roman Empire 90 people / square mile 550 9,000
Medieval France 105 people / square mile 650 10,000

Note that hexes which have no settled inhabitants and which are not garrisoned do not affect its size or population density for these purposes. Many countries in an ACKS setting might claim vast tracts of land, but they don’t really control it for game purposes.

Example: The Judge wants to create the realm of Albion, a fantasy version of 12th century medieval England. 12th century England had a population of about 2,000,000 spread across 50,000 square miles. The population of 2 million translates to 400,000 families in ACKS terms. Medieval England had a population density of only 40 people per square mile. That translates to 250 families per 6-mile hex or 4,000 families per 24-mile hex. The Judge’s realm of Albion should therefore be 1,600 6-mile hexes or 80 24-mile hexes. A regional map of Albion can be easily drawn using 2 contiguous sheets of hex paper using 6-mile hexes, while still leaving room for wilderness and rival kingdoms.

Placing Villages, Towns, and Cities

Once the Judge has developed one or more realms within his campaign setting, his next step should be to determine the number and location of major urban settlements within the realm(s). The Villages, Towns, and Cities of the Realm table shows the overall urban population based on the number of peasant families present in any given realm (or portion thereof). It also shows the largest settlement that will exist in any given realm. The largest settlement should generally be placed on a body of water or cross-roads in or near the most populous domain of the realm.

The Villages, Towns, and Cities Placement table can be used in conjunction with the Political Divisions of the Realm table to develop the complete urban demographics of a realm. Starting with the largest vassal ream and working downward, find the largest settlement for each vassal realm on the Villages, Towns, and Cities of the Realm table and place this settlement on the map somewhere within its appropriate realm. Urban settlements should generally be placed on rivers, lakes, coastlines and roads. After all cities, towns, and villages are placed, the remainder of the population is assumed to live in isolated homesteads and hamlets. When placing urban settlements on the map, the Judge can safely ignore Class IV and smaller settlements on the 24-mile campaign map, and Class VI settlements on the 6-mile hex regional map.

The monthly revenue of various urban settlements has already been factored into the values listed on the Revenue by Realm Type table.

Villages, Towns, and Cities Placement

Realm/Domain Population (families) Urban Population (families) Largest Settlement (families) Monthly Income Market Class
3,749- 374- Hamlets (74-) - Class VI*
3,750-4,999 375-499 Small Village (75-99) 18-24gp Class VI
5,000-7,999 500-799 Village (100-159) 25-39gp Class VI
8,000-12,499 800-1,249 Village (160-249) 40-60gp Class VI
12,500-22,499 1,250-2,249 Large village (250-449) 150-264gp Class V
22,500-31,249 2,500-3,124 Small town (450-624) 265-369gp Class V
31,250-62,499 3,125-6,249 Large town (625-1,249) 370-739gp Class IV
62,500-124,999 6,250-12,499 Small city (1,250-2,499) 740-1,474gp Class IV
125,000-249,999 12,500-24,999 City (2,500-4,999) 1,475-2,950gp Class III
250,000-499,999 25,000-49,999 Large city (5,000-9,999) 4,700-9,399gp Class II
500,000-749,999 50,000-74,999 Large city (10,000-14,999) 9,400-14,099gp Class II
750,000-1,999,999 75,000-199,999 Large city (15,000-19,999) 14,100-18,800gp Class II
2,000,000-3,999,999 200,000-399,999 Metropolis (20,000-39,999) 25,800-51,599gp Class I
4,000,000+ 400,000+ Metropolis (40,000+) 51,600gp+ Class I

*A Class VI market will exist at the domain’s stronghold only.

Example: Exarch Lazar’s realm, the exarchate of the South, consists of 2,300 domains with a total population of 600,000 peasant families (3,000,000 people). According to the Villages, Towns, and Cities Placement table, it has an urban population of 60,000 families and one large city of 12,000 families. His realm is divided up into 5 vassal realms, each ruled by a prefect with a population of 117,500 peasant families. Each prefect’s vassal realm has one small city of 2,350 families. Each prefect’s realm is divided between 4 palatines, each with about 27,500 peasant families. Each palatine’s vassal realm has one small town of 550 families. Each palatine’s realm is divided between 6 legates, each with about 4,333 peasant families. Each legate’s vassal realm has one small village of 90 families. Each legate’s realm is divided between 5 tribunes, each with about 700 peasant families. The tribune’s realms, and their subordinate castellans’ realms, have nothing larger than isolated homesteads and small hamlets. Thus the South has one large city (12,000 families), 5 small cities (2,350 families each, or 11,750 total), 20 small towns (550 families each, or 11,000), and 120 small villages (90 families each, or 10,800). This accounts for a total urban population of 45,500 families, or 7.5% of the total population. The remaining 14,500 urban families live in small hamlets sprinkled around the realm’s domains.

Adjusting Urban Demographics

ACKS generally assumes that around 10% of the population lives in urban communities and that around 20% of the realm’s urban population lives in its largest settlement. However, these numbers can vary widely depending on many factors, such as the age of the realm’s civilization, the division of the labor in the realm, and the extent of trade with other realms. The following table can be used to adjust a realm’s urban demographics.

Desired Urban Demographics Column Shift
Advanced, urban realm 1-2 rows downward on Urban Population
Agrarian, pastoral realm 1-2 rows upward on Urban Population
Centralized settlement pattern 1-2 rows downward on Largest Settlement
Dispersed settlement pattern 1-2 rows upward on Largest Settlement

If the Judge increases the size of the Largest Settlement, it will generally mean that the other urban communities must be adjusted in size in the opposite direction, and will be smaller. The converse is of course also true; a smaller central settlement will mean that the other urban communities must be larger.

Example: The Judge wants to create the realm of Achea, a city-state ruled by a powerful overlord. He has determined that Achea has a population of 40,000 families (200,000 people), controlling about 5,000 square miles (making it a large duchy in ACKS.) With a peasant population of 40,000 families, Achea would normally have an urban population of about 4,000 families, while the largest settlement would normally be a town of around 800 families. However, Achea is an advanced urban realm, so the Judge shifts downward 2 rows on the Urban Population column, and gives Achea an urban population of 20,000 families (50% of its total). An urban population of 20,000 families would normally mean the largest urban settlement is a Large City of about 4,000 families. Since Achea is a city state, the Judge shifts 2 rows downward on the Largest Settlement column and gives Achea a single Large City of 10,000 families (Class II). Knowing that the other urban communities should be proportionately smaller, the Judge assumes the remaining 10,000 urban families are spread throughout 20 small towns. 25% of the population lives in the city, another 25% in the towns, and the remaining half live in rural domains. 5,000 square miles is about 156 6-mile hexes. He draws Achea as a city in the center of a circular realm, 7 hexes in radius, sprinkling its villages around the city.

Generating Demand Modifiers

After placing cities, towns, and villages into the campaign setting, the Judge should next determine the demand modifiers for the various markets on the map. The demand modifiers for the markets can be assigned at his discretion to reflect a desired pattern of trade routes and commerce for his setting, or can be randomly generated using the following rules if the Judge wishes to have a mechanical method for doing so. These rules should also be used to generate demand modifiers for the adventurers’ domains.

1. Randomly Determine Base Demand Modifiers

Roll 1d3-1d3 for each type of merchandise, giving a range of -2 to +2 for the market.

2. Apply Environmental Adjustments

Adjust the base demand modifiers for each type of merchandise based on the domain’s environment, including its age, water source (if any), climate, and elevation. Simply consult the Environmental Adjustments to Demand table, below, and apply all relevant modifiers for the market. Drop any fractions remaining after all modifiers have been applied.

Example: The Judge is designing a domain beyond the borders of the Southern Province. The domain is located on a hilly section of sylvan woods (deciduous forest, hills) near the Mirmen River (river bank). It has never been settled before, so its age is 0. Beginning with Grain, he starts generating his new domain’s demand modifiers. He rolls 1d3-1d3 for Grain and gets a score of -1. This is then modified by an additional -1 (0 years old), -1 (river bank), and - 1/2 (deciduous forest), for a total of -3 1/2 . Dropping the fraction, he notes that his domain has a demand modifier of -3 for Grain. This process is repeated for each other type of merchandise.

3. Apply Domain-specific Adjustments

As noted under Strongholds and Domains, each domain has land revenue of 3gp per 9gp, reflecting whether some lands are rich in farm produce, timber, furs, stone, or even minerals. Others have barren, infertile soil with limited natural resources. These factors will affect the demand modifiers of the domain’s market. Domains with limited resources have a higher demand for goods and must pay more for them.

Domain Land

Domain Land Revenue Demand Modifiers
3gp +1 Demand Modifier to 6 merchandise types, -1 Demand modifier to 1 merchandise type
4gp +1 Demand Modifier to 4 merchandise types, -1 Demand modifier to 1 merchandise type
5gp +1 Demand Modifier to 2 merchandise types, -1 Demand Modifier to 1 merchandise type
6gp +1 Demand Modifier to 1 merchandise type, -1 Demand modifier to 1 merchandise type
7gp -1 Demand Modifier to 2 merchandise types, +1 Demand Modifier to 1 merchandise type
8gp -1 Demand Modifier to 4 merchandise types, +1 Demand Modifier to 1 merchandise type
9gp -1 Demand Modifier to 6 merchandise types, +1 Demand Modifier to 1 merchandise type

The specific types of merchandise affected can be determined randomly or selected to reflect the history and culture of the campaign setting. A domain in a pseudo-Chinese culture might have negative demand modifiers for porcelain and silk, but a positive demand modifier for mounts, while a domain in a pseudo-Viking culture might have a negative demand modifier for furs and fish, but a positive demand modifier for silk.

Example: The new domain has land revenue of 8gp, so the Judge must roll for four negative demand modifiers and one positive Demand modifier. He decides to randomly generate the domain-specific adjustments, starting with the negative modifiers. Rolling on the Common Merchandise table, he rolls a 94, directing him to the Precious Merchandise table. He rolls a 39, so his domain has a -1 demand modifier on precious metals. The Judge decides that that there are gold mines in the hills nearby. He repeats this process for the other three negative and one positive demand modifiers.

4. Apply Racial Adjustments

The demi-human races are noted for their production of certain merchandise, and their demand for others.

Race Demand Modifiers
Dwarf -2 Demand Modifier to beer/ale, common metals, tools, armor/weapons, rare metals, semi-precious stones, and gems +2 Demand Modifier to grain/vegetables, common wood, oil, hides/furs, rare furs, rare woods, and ivory
Elf -2 Demand Modifier to common wood, dyes/pigments, cloth, glassware, and porcelain +2 Demand Modifier to grain/vegetables, tea/coffee, rare books, silk, semi-precious stones, and gems

5. Determine Trade Routes

Markets may enjoy a regular exchange of goods with other markets along a trade route. For a trade route to exist, two criteria must be met. First, the markets must be connected by a road, trail, or navigable waterway. Second, both markets must be within each other’s range of trade, as listed on the Range of Trade table.

Market Class Range of Trade (Road) Range of Trade (Water)
Class VI 24 miles ( 4 hexes) 48 miles ( 8 hexes)
Class V 48 miles ( 8 hexes) 96 miles (16 hexes)
Class IV 72 miles (12 hexes) 120 miles (20 hexes)
Class III 96 miles (18 hexes) 240 miles (40 hexes)
Class II 144 miles (24 hexes) 360 miles (60 hexes)
Class I 168 miles (28 hexes) 480 miles (80 hexes)

Example: A castle (Class VI) is located along a road 24 miles from a large town (Class IV) and 96 miles from a city (Class III). The large town and the city are 72 miles apart. A trade route exists between the castle and the large town, and between the large town and the city, but not between the castle and the city, as the 96 mile distance is greater than the castle’s range of trade.

When a trade route connects two markets, the smaller market has all of its demand modifiers shifted by 2 points closer to the larger market’s demand modifiers (or set equal to the larger market’s demand modifiers if separated by less than 2 points). If the two markets connected by the trade route are of equal size, each shifts each of its demand modifiers by 1 point closer to the other market’s demand modifiers.

Demand Modifier Cyfaraun Samos (original) Samos (trade route)
Wood, common -3 -2 -3
Hides, furs -3 -1 -3
Metals, common -2 -3 -2
Grain +1 -2 0
Spices +1 0 +1
Silk +1 0 +1

When shifting demand modifiers for a region, start with the largest market and work outward to its direct trade routes, and then from there to the next markets, and so on.

Example: A Class IV city in the Southern province, and a Class V town down the road about 48 miles away share a trade route. The Class IV city will therefore shift all of the Class V town’s demand modifiers by 2 points closer to its own, as shown on the table below. The trade route has equalized much of the demand in the two markets.

Environmental Adjustments to Demand

– Age - - - - Water Source - - Climate - - - - - - - - Elevation - -
Merchandise 0-20 Years 21-100 years 101-1,000 years 1,001-2,000 years 2,001+ years Sea Coast Lake Shore River Bank Rainforest Savanna Desert Steppe Scrub Grasslands Deciduous Forest Taiga Tundra Plains Hills Mountains
Grain, vegetables -1 -1 0 +2 +3 0 0 -1 0 +1/2 +1 +1/2 -1/2 -1 -1/2 +1/2 +1 -1/2 0 +1/2
Fish, preserved +1/2 -1/2 -1/2 -1/2 +1/2 -1 -1/2 -1/2 0 +1/2 +1 +1/2 0 +1/2 -1/2 0 0 0 +1/2 +1
Wood, common -1 -1/2 0 +1 +2 0 0 0 -1 0 +1 +1/2 0 +1/2 -1 -1 +1 -1/2 0 +1/2
Animals +1/2 -1/2 -1/2 -1/2 +1/2 0 0 -1/2 +1 -1/2 +1 -1 0 -1/2 -1 0 +1/2 0 0 +1/2
Salt -1 -1/2 0 +1/2 +1 -1/2 -1/2 -1/2 +1 0 -1/2 -1/2 0 0 0 0 0 -1/2 0 0
Beer, ale +1/2 -1/2 -1/2 -1/2 0 -1/2 -1/2 -1/2 +1 +1 +1 +1 -1/2 0 -1/2 +1 +1 -1/2 -1/2 -1/2
Oil, lamp +1/2 -1/2 -1/2 -1/2 0 -1/2 0 -1/2 -1/2 0 +1/2 +1/2 -1 +1 0 -1 0 +1/2 -1/2 0
Textiles -1 -1/2 0 +1/2 +1 0 0 -1/2 +1 +1/2 +1 +1/2 0 -1/2 -1 -1 +1/2 -1/2 -1/2 0
Hides, furs -1 -1/2 0 +1/2 +1 0 0 0 0 0 0 0 0 -1/2 0 -1/2 -1/2 -1/2 0 0
Tea or coffee -1 -1/2 0 +1/2 +1 -1/2 0 0 -1 -1/2 -1/2 0 0 0 +1/2 +1 +1 0 -1/2 -1/2
Metals, common -1 -1/2 0 +1/2 +1 0 0 0 -1/2 0 0 0 0 0 +1/2 0 -1/2 +1/2 -1/2 -1/2
Meats, preserved +1/2 -1/2 -1/2 -1/2 +1/2 0 0 0 +1 0 +1 -1 0 -1/2 -1 0 -1/2 -1/2 0 0
Cloth -1 -1/2 0 +1/2 +1 0 0 -1 -1/2 0 +1/2 0 -1/2 -1/2 -1/2 +1 +1 -1/2 -1/2 0
Wine, spirits +1/2 -1/2 -1/2 -1/2 0 -1/2 -1/2 -1/2 +1 +1 +1/2 +1 -1 +1 -1/2 +1/2 +1 +1/2 -1/2 -1/2
Pottery +1 +1/2 0 -1/2 -1 -1/2 -1/2 -1/2 +1 +1 -1/2 -1/2 -1/2 0 0 0 0 0 -1/2 0
Tools +1 +1/2 0 -1/2 -1 -1/2 -1/2 -1/2 +1 +1 +1 +1 -1/2 -1/2 -1/2 +1 +1 -1/2 -1/2 0
Armor, weapons +1 +1/2 0 -1/2 -1 -1/2 -1/2 -1/2 +1 +1 +1 +1 -1/2 -1/2 -1/2 +1 +1 -1/2 -1/2 0
Dye & pigments +1 +1/2 0 -1/2 -1 -1/2 -1/2 -1/2 -1/2 0 -1/2 0 0 0 0 +1 +1 0 -1/2 0
Glassware +1 +1/2 0 -1/2 -1 -1/2 -1/2 -1/2 +1 +1 -1/2 0 -1/2 0 0 +1 +1 0 -1/2 0
Mounts +1/2 -1/2 -1/2 -1/2 0 0 0 0 +1 +1/2 -1/2 -1 -1/2 -1 0 +1/2 1 -1 +1/2 +1
Monster parts -1 -1/2 0 +1/2 +1 0 0 0 -1/2 -1/2 -1/2 0 0 0 -1/2 0 0 0 0 -1
Wood, rare -1 1/2 -1/2 0 +1 +2 0 0 0 -1 0 +1 +1/2 0 +1/2 -1 -1 +1 -1/2 0 +1/2
Furs, rare -1 -1/2 0 +1 +2 0 0 0 0 0 0 0 0 -1/2 -1/2 -1/2 -1 0 -1/2 -1/2
Metals, precious -1 1/2 -1/2 0 +1/2 +1 1/2 0 0 0 -1/2 0 -1/2 0 0 0 0 0 0 0 -1/2 -1/2
Ivory -1 -1/2 0 +1 +2 0 0 0 -1 -1 -1/2 -1/2 -1/2 +1/2 +1/2 +1/2 0 0 +1/2 +1
Spices +1/2 -1/2 -1/2 -1/2 +1 0 0 0 -1 -1/2 0 0 0 +1/2 +1 +1 +1 -1/2 +1/2 +1
Porcelain, fine +1 +1/2 0 -1/2 -1 -1/2 -1/2 -1/2 +1 +1 -1/2 -1/2 -1/2 0 0 0 0 0 -1/2 0
Books, rare +1 +1/2 0 -1/2 -1 -1/2 -1/2 -1/2 +1 +1 +1 +1 0 0 -1/2 +1 +1 0 -1/2 0
Silk +1/2 -1/2 -1/2 -1/2 +1 0 0 0 -1 -1/2 +1/2 +1/2 -1/2 +1 -1/2 +1 +1 0 -1/2 0
Semipr. stones -1 1/2 -1/2 0 +1/2 +2 0 0 0 -1/2 0 -1/2 0 -1/2 0 0 -1/2 0 0 -1/2 -1/2
Gems -1 1/2 -1/2 0 +1/2 +2 0 0 0 -1/2 0 -1/2 0 -1/2 0 0 -1/2 0 0 -1/2 -1/2

Assign NPC Rulers

At this point, the Judge will have a map of his campaign setting, divided into a series of realms, each with its own cities, towns, and villages, each with demand modifiers and trade routes. The next step is to begin to populate the setting with an appropriate number of high-level NPC rulers. The Demographics of Leveled Characters table shows the approximate frequency of leveled characters per person and the likely realm such a character might control. The Maximum NPC Population by Realm Type table shows the maximum number of characters of each level that are likely to exist in a realm of the given population.

The Judge does not need to assign every domain in his setting an NPC ruler in advance or calculate exactly where every NPC is located. It’s sufficient if the Judge determines the NPC ruler for the each of the highest-tier realms of his overall campaign setting, and the NPC rulers of the largest realms, cities and towns on his regional map.

Demographics of Leveled Characters

Level Frequency Possible Realm
1 1 in 20 Extended Family
2 1 in 50 Hamlet
3 1 in 150 Small barony
4 1 in 375 Barony or village
5 1 in 1,000 Small march or large village
6 1 in 3,000 March or large town
7 1 in 8,000 County or city
8 1 in 20,000 Large county or city
9 1 in 60,000 Duchy or large city
10 1 in 160,000 Small principality or metropolis
11 1 in 450,000 Principality
12 1 in 1,200,000 Small kingdom
13 1 in 3,250,000 Kingdom
14 1 in 10,000,000 Empire

Maximum NPC Population by Realm Type

NPC Level Empire (28,000,000) Kingdom (6,000,000) Principality (1,050,000) Duchy (180,000) County (32,750) March (5,600) Barony (800)
1 1,576,471 337,815 59,118 10,134 1,844 315 45
2 573,262 122,842 21,497 3,685 671 115 16
3 208,459 44,670 7,817 1,340 244 42 6
4 75,803 16,244 2,843 487 89 15 2
5 27,565 5,907 1,034 177 32 6 1
6 10,024 2,148 376 64 12 2 0
7 3,645 781 137 23 4 1 0
8 1,325 284 50 9 2 0 0
9 482 103 18 3 1 0 0
10 175 38 7 1 0 0 0
11 64 14 2 0 0 0 0
12 23 5 1 0 0 0 0
13 8 2 0 0 0 0 0
14 3 1 0 0 0 0 0

Constructing the Region

During the course of constructing the setting, the Judge should have created a regional map on a piece of hex graph paper, 30 hexes by 40 hexes, each representing a 6-mile wide hex (32 square miles). This will create a region of approximately 38,000 square miles. To put that into historical terms, that’s a region about the size of Greece and ,f history is any guide, is large enough to justify a distinct civilization with its own gods, heroes, and epic adventures.

Within that map, the Judge should place around 45 static points of interest. One-third of these should represent the settlements, towns and castles of the humans and demi-humans, while the other two-thirds (30) should be dungeons (including lairs or special areas). Of the 30 dungeons, we recommend 3 large dungeons each designed for about 6-10 sessions of play; 10 dungeons designed for 1-2 sessions of play; and 17 small “lair” dungeons designed for a half-session of play, i.e. 1-3 encounters. Each point of interest in the regional map should initially receive one paragraph of description.

For the dungeons and mega-dungeons, the Judge should just describe the dungeon briefly, to be fleshed out later, but for the small lairs, he can cover everything he’ll need to use it in play.

Example: Hex #28 Lair of the Chimera - A copse of giant acacia trees rises from the steppes here, and many wild sheep, gazelle, and other animals graze on the shrubbery and fruit and water at the nearby pond. They are preyed on by a pack of 2 Chimeras that live in a sinkhole near the oasis. In the sinkhole, amidst bones of dead, are a leather satchel with 15 amethysts (100gp each) and 1 small diamond (1,000gp) and 2 torn sacks of gold (1,200gp total).

Dynamic Lairs

At this point, the regional map should have a density of about one point of interest every 6 hexes (36 miles), putting them roughly 2 days apart at historical travel speeds. With (30 x 40) 1,200 hexes on the regional map, the vast majority of the region will be empty of points of interest. The rest of the regional map will be filled randomly during play with dynamic lairs. A dynamic lair is a small dungeon or lair, created in advance like a point of interest, which includes 1-3 encounters. However, these dynamic lairs are not placed on the regional map unless and until they are discovered in play through a wilderness encounter throw (described later) that results in a lair encounter. A sample dynamic lair is below.

Example: Manticores - % In Lair 20%. An ancient cistern has collapsed here, creating a sinkhole, 300’ wide and 120’ deep. The remnants of the fluted columns that once supported the cistern are visible, like jagged teeth rising up from the waterline, and small metal objects glitter below the water. The abandoned cistern is the lair of 4 Manticores. 6,000gp in Archaic coinage is scattered across the floor of the cistern, which is used as a lure by the creatures.

In the example above, if the party encountered manticores randomly as wandering monsters, there would be a 20% chance they actually discovered the pre-created manticore lair in the ancient cistern. When discovered, the Judge would write down the hex number where it is to be found on the regional map in case the party returns to the area. From the adventurer’s point of view, they cannot tell the difference between the pre-placed points of interest and dynamic lairs. Wherever they go on the regional map, there will be a mix of wandering encounters, dynamic lairs, and dungeons to be discovered. On the Judge’s actual regional map, though, there will be a lot of empty hexes with unusually high clusters of dynamic lairs that happen to be along the routes the adventurers have traveled. This method ensures that wherever the adventurers travel within the region, they will always find interesting places and encounters.

The Judge should create at least one dynamic lair for each major monster in his setting. Since each lair is unique and can only be discovered once, very common creatures such as orcs should get 2-3 dynamic lairs for each. The ACKS Lairs and Encounters supplement, available separately from Autarch, will provide a dynamic lair for all monsters in the ACKS core rules.

Balancing the Challenge

Over the course of a campaign of ACKS, the adventurers will advance from weak-kneed apprentices to mighty heroes and lords. The Judge should take into account the reality of level advancement when creating his regional map.

The easiest way to address level advancement is to design the regional map as a “borderlands” environment. A borderlands provides a built-in structure to explain the gradient of challenges the party faces. To build a borderlands, first place a string of border forts, towns, or other settlements running along one axis of the map, about 1/2 of the way in. To the rear of the border forts, place the region’s largest town or settlement. Beyond the border forts is the wilderness where the majority of the dungeons and lairs will lie. The Judge should place these such that the deeper the players travel into the wilderness, the more dangerous it becomes. A few areas of higher-than-normal danger can be placed close to the border but in geographically isolated places; for instance, an evil fortress high up on a mountain, or a very deep underground river.

Finally, place one low-level mega-dungeon close to the border, one mid-level mega-dungeon a moderate distance away, and one murderously hard mega-dungeon on the far side of the map. Build the dynamic lairs and wandering encounters such that they are at a mid range of difficulty (5th-9th level range).

The result of this structure is that early on in the campaign, the party will adventure near the border settlements. They cannot safely confront the dangerous wandering encounters of the wilderness (which will be several levels higher than them) so they will tend to travel from border settlement to border settlement, assisting each settlement in clearing out whatever threats are nearby. Then when they reach the middle levels of experience, they will begin to go into the wilderness, knowing they can handle any wandering encounters they run into. Again, they may work from border settlement to border settlement, but this time in widening circles of exploration into the wilderness. As their power peaks, they will begin conducting forays deeper in the wilderness, far beyond the border. At this time they will often begin capturing or building strongholds to use as a staging point for deeper forays into harder challenges, or to begin to exert their power over the region. The occasional high-level areas close to the border (like the castle on the mountain) serve as a reminder of the evil that lurks beyond, and also as a nice taste of what they can expect when they are ready to go deep.

Constructing the Starting City

When the Judge has finished constructing the region, he will have placed settlements at many locations on the map. The next step is to pick one of these as the group’s starting city. Details can be worked out for surrounding cities later, when the need requires.

The starting city should generally be a border town with a low level dungeon situated somewhere nearby. The population, demand modifiers, and ruler of the starting city should have already been selected in previous steps, but now the Judge must flesh these out into a description of the city. The starting city should have its tribune, lord mayor, sheriff, or other authority figured given a name, title, level, and class. It should have one or more churches for prominent religions, a thieves’ guild, and a city militia that is appropriate in size and power to the size of the settlement.

The Starting Cities table, below, can help the Judge construct a starting city that is compatible with ACKS. On the Minimum Ruler Level category, the standard value is for an independent city, while the parenthetical value is for a settlement within an appropriately sized realm (see Placing Villages, Towns, and Cities).

Starting Cities

Settlement Population Settlement Type Minimum Ruler Level Market Class # of Fighters # of Thieves # of Clerics # of Mages
74- Hamlet 2 (6) - 6- 3- 3- 2-
75-99 Small village 2 (7) Class VI 12 6 6 3
100-249 Village 3 (8) Class VI 16 8 8 4
250-449 Large village 4 (8) Class V 40 20 20 10
450-624 Small town 5 (9) Class V 72 36 36 18
625-1,240 Large town 6 (9) Class IV 100 50 50 25
1,250-2,499 Small city 7 (10) Class IV 200 100 100 50
2,500-4,999 City 8 (10) Class III 400 200 200 100
5,000-19,999 Large city 9 (12) Class II 800 400 400 200
20,000+ Metropolis 10 (14) Class I 3,200+ 1,600+ 1,600+ 800+

Determine Criminal Guilds

Given the unsavory nature of many adventurers, the thieves’ guild and other criminal organizations within the starting city should be developed in detail. The Starting City Criminal Guilds table can guide the Judge in constructing a criminal guild compatible with ACKS.

Starting City Criminal Guilds

Market Class Total Membership Highest Boss Level Monthly Syndicate Revenue (gp) Monthly Guild Revenue (gp)
Class VI 16 3 (5) 1,500 -
Class V 42 4 (7) 3,350 4,850
Class IV 100 5 (7) 7,350 12,250
Class III 375 6 (10) 22,000 35,000
Class II 750 7 (12) 40,000 75,000
Class I 3,000 8 (14) 100,000 175,000

Total Membership shows the total membership of the starting city’s criminal guild(s) relative to its market class. 45% of the members of any criminal guild will be 0th level ruffians, 35% will be 1st level characters of appropriate classes (thieves, assassins, nightblades, etc.), 12.5% will be 2nd level, and 7.5% will be 3rd level or higher.

Highest Boss Level is the expected level of the most powerful boss in the starting city. When determining the level of the guild’s boss, the standard value is for an independent city, while the parenthetical value is for a settlement within an appropriately sized realm (which most are).

Monthly Syndicate Revenue is how much gold the boss’s syndicate in the starting city generates per month. Monthly Guild Revenue shows how much gold the boss’s criminal guild generates, factoring in syndicates run by underbosses in other cities, towns, and villages. If the starting city is isolated or highly independent, its syndicate may not be part of a larger guild (Judge’s discretion)

The Starting City Criminal Guilds table assumes that the settlement’s criminals have been consolidated into a single guild managed directly by one boss. If desired, the Judge may split a settlement’s criminals into multiple competing or complimentary guilds. For example, a Class I metropolis might have 3 competing thieves’ guilds with 750 members each and a separate assassins’ guild of 750 members. Where this is done, highest boss level, monthly syndicate revenue, and monthly guild revenue should be based on the guild membership of each guild, rather than the market class of the settlement.

Example: There is a Class IV settlement, meaning it should have 100 members in its criminal guilds. The Judge decides it has 2 thieves’ guild of 42 members and one assassins’ guild of 16 members. He decides the first thieves’ guild is led by Nicodos (7th level Thief) and the other by Syrena (7th level Thief), both earning 3,3,350gp per month. The assassin’s guild is run by Rollio (5th level Assassin), earning 1,500gp per month.

Adventure Hooks

While some adventurers will happily explore any hole in the ground that glints of gold, others want a motive for delving into a dungeon or wilderness. The Judge can use the starting city as a place to learn rumors or legends about adventuring opportunities, or to find clues about the mysteries of the region. The following general scenario themes are good places to start in developing motives for the characters to go adventuring.

Exploration is a common hook adventures. Characters might want to explore an area they have heard about from rumors or legends, or they might be hired by a high-level NPC. Sometimes the purpose of exploration is simply to chart a previously unknown place, or to clear an area of danger.

Fighting evil is another possible hook. Characters might be hired to destroy monsters that have overrun a location, or to eliminate a powerful evil that has developed. They might be hired to remove evil monsters that have taken over a holy place.

Magical doorways are another good adventure hook. A magical doorway, or portal, can lead to new and unique locations, or even new worlds or times. Characters will sometimes encounter magical portals in dungeons, which could lead to new areas of a dungeon, to riches, or even certain death!

Rescue missions can be to free wrongly imprisoned victims, help prisoners escape from slavers, or rescue captives from cannibalistic monsters. The characters may be hired to rescue others, or may have personal motivations.

Quests are usually undertaken at the request of a powerful or rich patron, like a merchant or king. A quest might be to find a legendary item or return something that has been stolen.

Constructing the Dungeons

During the course of constructing his campaign’s starting region, the Judge will have placed about 30 different dungeons of varying size on his regional map. The Judge should not feel obliged to create all the dungeons himself. In fact, doing so is an enormous time sink. The most experienced Judges generally gather dozens of adventures, lairs, and encounters from magazines, websites, and commercial products and adapt them to their setting, focusing on personally creating just a few special areas.

The following section outlines how to create a dungeon, and different considerations to keep things interesting.

Selecting Dungeon Type

First, the Judge must choose the type of dungeon he is creating. Many dungeons are underground complexes of hallways and chambers. But dungeons can also twisting natural caverns, catacombs, tombs, crumbling towers, huge temples, unbreakable castles, ruined cities, or any other structure imaginable. To randomly determine the dungeon’s type, roll 1d20 on the Dungeon Type table.

After the dungeon type is determined, the Judge must draw a map of the location. Square graph paper should be used. The assumed scale for ACKS is that each square on the graph paper equal 10’. If the Judge is using a large play mat with grids on it for using figurines, the map should be drawn at a scale of 1” equals 5’. This provides an appropriate scale for use with typical 25 mm scaled figurines. The map itself should be drawn to suit the type of dungeon, such as twisting tunnels in a cavern, endless rooms in a dank dungeon, or hallways and rooms in a ruined castle.

Roll Dungeon Type
1 Abandoned mine
2 Barrow mound
3 Catacombs
4 Cliff city
5 Crumbling castle
6 Giant burrow
7 Giant insect hive
8 Humanoid warren
9 Maze
10 Monster lair
11 Natural caverns
12 Prison
13 Ruined manor
14 Sewers
15 Sunken city
16 Temple
17 Tomb
18 Tower
19 Underground river
20 Wizard’s dungeon

Stocking the Dungeon

After the map for the location has been drawn, the Judge must stock the dungeon with dangerous monsters, traps, and treasure. The Judge can choose where to place these, or roll randomly on the Dungeon Stocking table.

Roll on the Dungeon Stocking table once for each room on each level of the dungeon. Each roll may result in either an empty room, a monster encounter, a trap, or a unique dungeon feature. Record the results for each dungeon level separately. Each set of results indicates what will be found on that level of the dungeon. Then assign each result to a specific room according to the interaction between the logic of the dungeon and the nature of the result, following the guidelines below.

Example: The Judge has mapped a single level dungeon with fifteen rooms. He rolls on the Dungeon Stocking table fifteen times. He gets four “empty” results, eight “monster” results, two “trap” results, and one “unique” result. His next step will be to place these results onto his dungeon map in a logical (or at least entertaining) manner.

Dungeon Stocking

Roll d100 Contents Treasure
01-30 Empty 15%
31-60 Monster If Lair
61-75 Trap 30%
76-100 Unique As Needed

Placing Monsters

For each “monster” result obtained on the above table, the Judge must choose or roll for a monster encounter appropriate for the dungeon level it appears on. The Wandering Monster tables, below, can be used for this purpose. The Judge should begin by rolling on the Dungeon Wandering Monster Level to determine which table to consult. The Judge should then consult the Random Monsters by Level table to determine the specific monster and the number appearing.

Example: The Judge obtained eight “monster” results on the Dungeon Stocking table. He decides to roll randomly to determine the specific monsters. Since this is a single level dungeon, he rolls eight times on the Dungeon Wandering Monster Level table for Dungeon Level 1. The dice indicate that seven of the monster encounters will be of Monster Level 1, and one will be of Monster Level 2. Rolling on the Monster Level 1 sub-table, his results are 8, 11, 3, 1, 1, 1, 1, resulting in 4 encounters with 2d4 goblins each; 1 encounter with 1d12 morlocks; 1 encounter with 3d6 giant rats; and 1 encounter with 1d10 stirges. Rolling once on the Monster Level 2 sub-table, his result is an 8, indicating an encounter with 1d6 pit vipers.

Next, the Judge must assign each monster encounter to a room in the dungeon level. Monsters generated from a lower-level table might be placed near stairs or other inter-level passages connecting them to their natural level, or surrounding the lair of an intelligent monster from the current dungeon level which employs the lower-level monsters as guards. Intelligent monsters from higher-level tables might be placed in hidden or inaccessible areas, while unintelligent powerful monsters might have a whole dungeon area to themselves, shunned by other creatures.

When placing monsters the Judge should consult the monster entries in Chapter 8 to determine if the monsters are in a lair. Monsters with lairs will have treasure, as detailed below in Assigning Treasure. For most creatures, such as giant rats or centipedes, the Judge can simply check against the monster’s % In Lair to see whether the monsters have a lair in the dungeon or are just temporarily holing up. If monsters are in their lair, the Judge can add additional encounters with the same type of monster nearby in order to scale up the number of creatures to the full lair amount, if desired.

Example: The Judge consults the monster entries to find the % In Lair for giant rats (10%), stirges (40%) and pit vipers (none). He rolls for % In Lair for the rats and stirges, and determines that the stirges are in a lair. A lair of stirges can be as many as 3d12, but he decides to stick with one encounter of 1d10 stirges so as not to overwhelm the dungeon with stirges.

Some types of monsters have lairs composed of a variable number of encounter groups. For example, goblins are encountered in gangs (encounter groups) of 2d4, and a goblin lair is composed of 3d6 gangs. If the stocking procedure has generated multiple encounters with a particular type of organized monster, then the dungeon should be assumed to hold a lair of that type of monster. One room in the dungeon should be chosen as the lair, and one of the monster encounters assigned to it. The other encounters rolled for that monster type should be placed nearby to form watch points, barracks, or splinter colonies. The various rooms should then be reinforced with any leaders, champions, or other creatures indicated by the monster entry. If space permits, the Judge can also add additional groups in other nearby rooms, up to the maximum number of groups that can be encountered for a lair.

Example: Because the Judge rolled four encounters with goblin gangs, the dungeon holds a goblin lair. The Judge chooses a remote room in the rear of the dungeon as the lair, and places one goblin gang there. Nearby he places several guard posts with the other three gangs. He adds a champion to each gang, as instructed by the monster entry. The entry also states that a lair will have a chieftain, sub-chieftain, females, and young, so he adds those creatures to the lair room.

Sometimes the stocking procedure results in only one encounter with a monster that normally lairs in organized groups. Such isolated parties will not normally have lair treasure, unless the monster entry indicates that the number of groups appearing in the lair can equal one; in this case, the lone group may be the survivors of a larger tribe, or a splinter faction absconding with a portion of their former brethren’s treasure. Otherwise, the Judge has two options. He can roll additional groups to form a lair of the size indicated by the monster entry, or he can decide that the group on this level is simply an isolated party temporarily holing-up in the dungeon.

Example: The Judge rolled one encounter with a gang of morlocks. Morlock lairs consist of 1d8 gangs. The Judge therefore has three options. He can choose to have these morlocks constitute a small lair of one gang; he can choose to add additional gangs; or he can decide that the morlocks are an isolated group and not part of a lair. He opts for the latter.

Placing Traps

Traps include deadfalls, spiked pits, poisoned needles in door handles, and other obstacles intended to harm, capture, or delay dungeon explorers. When placing traps, the Judge should consider the location of lairs, chokepoints, key intersections, and other factors. Unless the dungeon is a “fun house” made by some mad mage, traps should be placed with a purpose, such as protecting an area, interdicting a passage, raising an alarm, and so on.

There are many possibilities for what kind of traps to place in a dungeon. All traps have specific triggers, whether they be opening a door or walking over a particular area. Every time an adventurer takes an action that could trigger a trap, the Judge should roll 1d6. A result of 1-2 indicates that the trap springs. Once triggered, a trap has a specific effect depending on its type. Some traps may offer a saving throw to reduce or avoid their effects, or may only damage the characters on a successful attack throw. The traps below are classic examples suitable for 1st through 3rd level dungeons. More challenging dungeons should have deadlier traps.

Arrow Trap: When triggered, an arrow fires from a hidden location, attacking one adventurer as a 1st level fighter for 1d6+1 damage.

Bricks from Ceiling: When triggered, bricks fall from the ceiling. Each adventurer in a 10’ radius must make a saving throw versus Blast or suffer 2d6 points of damage.

Camouflaged Pit Trap: When triggered, a pit opens beneath the feet of all adventurers in a 10’ x 10’ square. Adventurers who fall down the pit take 1d6 points of damage per 10’ fallen. Pits should generally be 10’ deep per dungeon level.

Poison Dart Trap: When triggered, a dart fires from a hidden location, attacking one adventurer as a 1st level fighter for 1d4+1 damage. If the adventurer is hit, he must save versus Poison or die.

Poison Needle Trap: When triggered, a small needle pops out of a lock. The adventurer who triggered the trap must save versus Poison or die.

Portcullis Trap: When triggered, a portcullis falls suddenly downward. The adventurer who triggered the trap must make a save versus Blast or suffer 3d6 points of damage. The way will then be blocked, and party members may be separated.

Rolling Rock Trap: When triggered, a rock rolls out from a hidden location. All adventurers in the room or hallway must save versus Blast or suffer 2d6 points of damage.

Scything Blade Trap: When triggered, a scything blade swings out from a hidden location. All adventurers in a 10’ line must save versus Blast or suffer 1d8 damage.

Spiked Pit Trap: As a camouflaged pit trap, but adventurers also fall on 1d4 spikes, each dealing 1d6 points of damage in addition to falling damage.

Unique Encounters

Unique encounters are special encounters or special areas that stand out from encounters in most other rooms, such as talking statues, pits with slides down to other rooms or dungeon levels, magical illusions, scrying pools, teleporting doorways, and mysterious fountains whose water confers beneficial or baleful effects. The Judge should think out each unique encounter carefully. The special effects of unique encounters might be known to some of the dungeon inhabitants and used for their own ends. One reward of figuring out the trick of a unique encounter could be that adventurers can likewise benefit, for example by sending charmed creatures through a teleporter to cause havoc, using a slide to gain access to a hidden area of the dungeon, or evading pursuit by hiding behind an illusory wall.

Not all unique rooms involve monsters, but the when the Judge chooses to do so, he can select from a variety of monsters which are well suited for creating tricks and surprises. The Unique Monsters table lists monsters appropriate for unique rooms on each level. Some of these creatures, like skeletons, golems, and animated statue, can be plausibly employed to power mechanisms like elevator cages and roundabouts, as well as acting as guardians for those who might interfere with their workings. Enchanted monsters like invisible stalkers, elementals, djinni, and efreeti are frequently bound to a room with instructions to perform some task, the purpose of which may have long since become meaningless. Those who can free them from this servitude may gain great rewards. Deceptive monsters such as rot grubs, ochre jelly, and doppelgangers may create tricky situations by acting on their own initiative, for example by infesting what appears to be a haul of treasure and merchandise or taking up residence in a seemingly empty room. Those who construct dungeons may also find these creatures useful in preparing a surprise for intruders. A pit trap is an ordinary dungeon stocking result, but a pit trap filled with a gelatinous cube or a rust monster is deserving of the “unique” appellation.

Unique Monsters

Dungeon Level Monsters
1 Rot grub, spitting cobra, skeleton
2 Green slime, wood golem, yellow mold
3 Gelatinous cube, gray ooze, animated statue (iron, crystal), doppelganger, shadow
4 Animated statue (stone), ochre jelly, rust monster
5 Golem (bone), invisible stalker, mummy
6 Golem (amber, bronze), black pudding, djinni, efreeti, elemental

Assigning Treasure

After all monsters, traps, and unique features have been placed in the dungeon, the Judge should assign treasure to the various rooms.

Monsters will have treasure if they are in their lair. Empty and trap rooms will have treasure 15% and 30% of the time respectively. If treasure is present, the treasure should be determined based on the Treasure Type of the monster encountered, or from the Unprotected Treasure table for treasures that appear in conjunction with empty or trap rooms.

Unprotected Treasure

1d6 Roll for Treasure Type

Dungeon Level 1 2 3 4 5 6
1 A B C D E F
2 C D E F G H
3 E F G H I J
4 G H I J K L
5 I J K L M N
6 M N O P Q R

Treasure placed in monster lairs should make sense in the context of the monster. For instance, an owl bear’s treasure might be just a pile of loose coin and goods intermixed with the bones of past victims, while a goblin band’s treasure might be kept in a locked chest hidden by the goblin chief, with the key kept on his person.

When unprotected treasure is indicated in a room, it should seldom be lying about and easily seen. Generally, this kind of treasure has been hidden, possibly by monsters or NPCs who may or may not still be present and aware of its location. The treasure will usually be buried, hidden in a secret recess, or otherwise disguised, and the Judge should place it in rooms with these features.

Treasure placed in rooms with traps could be hidden, or it could be placed on the corpses of previous victims of the trap. This paradoxically alerts characters to the danger posed by the trap while encouraging them to get close enough to its hazards to loot the corpses of those who were not thus alerted, or thought they would be able to avoid its effects. To kill adventurers with unexpected traps is a hollow pleasure for the Judge; to kill them with traps they decided to trigger, despite every warning of the lethal risks, is deeply satisfying.

Treasure should be placed in rooms with unique encounters as needed. Sometimes this will be necessary to round out the ratio of wealth to experience points on the level, as described below. An obvious treasure may also be needed to tempt adventurers into engaging with a room’s unique feature. Always suspecting a trick of some kind, dungeon explorers are typically wary of stepping into rooms with lifelike statuary, checkerboard floors, or arcane glyphs. Placing treasure on the other side of such hazards may encourage further exploration, especially if the treasure is not an obvious lure which raises suspicion in its own right.

As a final stage of treasure placement, the Judge should sum up the treasure placed on the level and compare it to the total number of experience points available from monsters on the level. The ideal ratio is 4gp worth of treasure for every 1 XP from monsters. The random monster charts are designed to yield this result on average, but as the action of probability does not always yield average results, the Judge may need to adjust the result. When too little treasure appears, the Judge may wish to remove some monsters or add more treasure; doing the opposite will help address an overbalance that produces too much treasure. More details are provided in Chapter 9, Planned Treasure Generation.

Finishing the Dungeon Design

The Judge should take care to describe rooms and passageways as they fit the environment. How do areas smell? What do they look like? What creatures live here, and what evidence do they leave behind? The Judge should add enough description to keep players interested in the dungeon, but should not go so far that the description is too deep and becomes tiresome. One option is to fully describe only a small proportion of the rooms in a dungeon. These rooms would include rooms with special or unique encounters. The remaining rooms, while they may have monsters and treasure, can be similar to one another in description. Unimportant random details can be made up during actual game play. However, anything significant which is made up on the spot must be written down to maintain consistency if the characters return to the same room.

In addition, a multi-level dungeon used for extensive play should be considered a “living” place. The Judge should keep track of how the player characters alter the environment, and how resident monsters may change in number, type, or behavior in response. A mega-dungeon will evolve through time just as the characters will by adventuring there.

Wandering Monsters

Monsters often live in the tunnels, caves, and chambers of dungeons, or lair in the treetops, natural caves, and warrens of the wilderness. However, monsters do not only stay where they live. They also wander, hunt, and explore, both underground and in the wild. Indeed, some monsters never stop moving long enough to make a lair at all. Such creatures are called wandering monsters, and they can represent a dire threat to adventures.

The Judge should check for wandering monsters periodically during the course of an adventure by making an encounter throw. The frequency of encounter throws and the required target value will vary depending on the adventurer’s activities and location. If an encounter throw results in a wandering monster, the Judge will then consult the Wandering Monster tables to determine what has been encountered, and then adjudicate the encounter using the Encounter rules from Chapter 6.

Wandering Monsters in the Dungeon

When the characters are in a dungeon, the Judge should make an encounter throw every 2 turns. An encounter throw of 6+ on 1d6 indicates that a wandering monster is encountered. The Judge should modify the die roll if the characters are being exceptionally loud or stealthy, traversing a highly inhabited or desolate area, and so on. When an encounter is indicated, roll on the Wandering Monster table appropriate to the dungeon level the creatures are encountered on.

When a dungeon wandering monster encounter occurs, the following steps should be followed:

  1. Find the row of the Dungeon Wandering Monster Level table that shows the dungeon level on which the monster has been encountered. Roll 1d12 and read across to find the column specifying which Random Monster table will be used to generate the monster. Roll 1d12 on the resulting Random Monster by Level table to determine the type of creature encountered.

  2. Roll the appropriate number encountered for the creature to determine how many are present. Increase or decrease this roll by one-half for each step of difference between the dungeon level and the Random Monster table used (round down). For example, consulting Random Monster table #3 might indicate 1d6 wights. A roll of 5 would result in 1 wight if this encounter takes place on level 1; 2 on level 2; 5 on level 3; 7 on level 4; or 10 on level 5.

  3. Roll 2d6 x 10 to determine the encounter distance in feet separating the characters and monster(s) at the point when the characters may become aware of the monster, unless factors such as light source, dungeon geometry, etc. take precedence. The Judge should take into account the dungeon layout and known placement of other monsters to determine the direction from which the wandering monsters are approaching.

Roll for surprise and reactions as described in Chapter 6, Dungeon Encounters. Modify the reaction roll by the difference between the Random Monster table used and the dungeon level of the encounter. For instance, if the wights from table 3 are encountered on level 5, they have a -2 penalty to reaction rolls; if encountered on level 1, they have a +2 bonus to reaction rolls. The numerical superiority of monsters traveling deeper into the dungeon makes them more likely to attack. On the other hand, powerful monsters wandering on an upper level are more inclined to view the party as tools than threats.

Dungeon Wandering Monster Level

Dungeon Level 1 2 3 4 5 6
1 1-9 10-11 12 - - -
2 1-3 4-9 10-11 12 - -
3 1 2-3 4-9 10-11 12 -
4 - 1 2-3 4-9 10-11 12
5 - - 1 2-3 4-9 10-12
6 - - - 1 2-3 4-12

Wandering Monster Table Guidelines

Dungeon Level Party Level Monster XP Value
1 1 1-15
2 2-3 20-47
3 4-5 50-150
4 6-7 175-475
5 8-9 500-1,140
6 10+ 1,200+

Random Monsters by Level

Roll Monster Level 1 Monster Level 2 Monster Level 3 Monster Level 4 Monster Level 5 Monster Level 6
1 Goblin (2d4) Gnoll (1d6) Bugbear (2d4) Lycanthrope, Werebear (1d4) Ettin (1d2) Cyclops (1)
2 Kobold (4d4) Hobgoblin (1d6) Lycanthrope, Werewolf (1d6) Lycanthrope, Weretiger (1d4) Giant, Hill (1d4) Giant, Cloud (1d2)
3 Morlock (1d12) Lizardman (2d4) Ogre (1d6) Minotaur (1d6) Giant, Stone (1d2) Purple Worm (1d2)
4 Orc (2d4) Troglodyte (1d8) Throghrin (1d6) Boar, Giant (1d4) Troll (1d8) Demon Boar (1d4)
5 Beetle, Fire (1d8) Bat, Giant (1d10) Ant, Giant (2d4) Owl Bear (1d4) Ankheg (1d6) Dragon (20 HD) (1)
6 Centipede, Giant (2d4) Fly, Giant Carnivorous (1d8) Lizard, Draco (1d3) Phase Tiger (1d4) Caecilian (1d3) Hydra (12 HD) (1)
7 Ferret, Giant (1d8) Locust, Cavern (1d10) Scorpion, Giant (1d6) Rhagodessa, Giant (1d4) Basilisk (1d6) Gorgon (1d2)
8 Rat, Giant (3d6) Snake, Pit Viper (1d8) Wolf, Dire (1d4) Snake, Giant Python (1d3) Hell Hound, Greater (2d4) Lamia (1)
9 Men, Brigand (2d4) Ghoul (1d6) Carcass Scavenger (1d3) Cockatrice (1d4) Salamander, Flame (1d4+1) Remorhaz (15 HD) (1)
10 Skeleton (3d4) Men, Berserker (1d6) Gargoyle (1d6) Medusa (1d3) Spectre (1d4) Skittering Maw (1)
11 Stirge (1d10) Zombie (2d4) Wight (1d6) Wraith (1d4) Wyvern (1d2) Vampire (9 HD) (1d4)
12 NPC Party (Lvl 1) (1d4+2) NPC Party (Lvl 2) (1d4+2) NPC Party (Lvl 4) (1d4+2) NPC Party (Lvl 5) (1d4+2) NPC Party (Lvl 8) (1d4+3) NPC Party (Lvl 14) (1d4+3)

Creating Dungeon Wandering Monster Tables

Enterprising Judges may wish to design their own wandering monster tables. The sample tables below reflect some principles which may be useful in creating your own tables to reflect the overall mix of creatures in your campaign or the unique designs of specific dungeons.

The first consideration in dungeon design is providing a mix of challenges. Some monsters band together in groups and might be negotiated with if adventurers speak their language. Their organization means that they often set up patrols and call for reinforcements, but also that their internal rivalries and feuds with outsiders can be exploited. In ACKS, such monsters are typically beastmen, and they generally occupy entries 1-4 of each wandering monster table. Entries 5-8 are animals, vermin, and other creatures which might be mindless or act on instinct. Such monsters fill a role in the dungeon ecology, and also provide scope for adventurers to use spells like speak with animals or gambits like delaying pursuit by dropping sacks of meat.

The final category - usually entries 9-12 on each wandering monster table - are men and monsters, who often exploit or prey upon the other monsters on the level. This category of monsters is less communal and more independent than beastmen, and more intelligent and/or more supernatural than vermin. Dealing with men and monsters allows adventurers to use their unique solutions to problems, from turning undead to avoiding a petrifying gaze. The last entry in this category is always reserved for NPC parties, who may be rival adventurers from civilized lands or potent emissaries from monstrous domains; these encounters are especially challenging because NPC parties tend to have goals, capabilities, and ruthless priorities similar to those of the player characters.

An equally important consideration in designing a dungeon level is placing an appropriate and varied assortment of treasure. Fortunately, having a varied mix of monster roles tends to also ensure a good diversity in treasure. Beastmen tend to be raiders, with sizable but relatively low-level hoards extorted from weaker creatures or received in payment for serving stronger ones. Vermin often have incidental treasure, as many might be attracted to shiny objects or have an ecology that involves gathering the corpses of creatures that do carry wealth. And most hoarders - organized or strong creatures powerful enough to gain and defend the highest-value, lowest-bulk treasure - occupy the men and monsters role. For further information on treasure categories, see Random Treasure Generation in Chapter 9.

The last, and perhaps most important, factor in creating a wandering monster table is choosing monsters whose capabilities are appropriate to the dungeon level. The Wandering Monster Table Guidelines table indicates the criteria used to design the sample encounter tables above. It is recommended that Judges creating a new table follow these guidelines for selecting most or all of its monsters. While it is certainly desirable for adventurers to face both stronger and weaker monsters, the Dungeon Wandering Monster Level table consulted when rolling for each encounter will do much to ensure that this is the case. Adventurers will often do the rest, by seeking out depths too dangerous for them or slumming in the shallows which offer little challenge (and little reward). Having random tables that are appropriate to each level thus allows chance, and the equally random factor of player choice, to determine which level’s table comes into play.

Wandering Monsters in the Wilderness

When the characters in the wilderness, the Judge should make an encounter throw once per day if they are stationary or in settled terrain. Otherwise, the Judge should make an encounter throw each time the adventurers enter a new 6-mile hex. The chance of encountering a wandering monster in the wilderness varies depending on the type of terrain. To check for wandering monsters, throw 1d6 and consult the Encounter Frequency by Terrain table.

Encounter Frequency by Terrain

Terrain Encounter Throw
City, Grasslands, Scrub, or Settled 6+
Aerial, Hills, Ocean, Woods, or River 5+
Barren, Desert, Jungle, Mountains, or Swamp 4+

When a wilderness wandering monster encounter occurs, the following steps should be followed:

  1. Roll 1d8 on the appropriate column of the Wilderness Encounters by Terrain table and consult the resulting sub-table.

  2. Roll 1d12 on the resulting sub-table to determine the type of creature encountered.

  3. Find the encountered creature’s entry in the Monster chapter and roll against its % In Lair to determine whether the creature is in its lair. If the creature is in its lair, a dynamic lair can be used (if one is available).

  4. Otherwise, roll the appropriate number encountered for the creature to determine how many are present.

  5. If the encounter is in the creature’s lair, roll against the creature’s Treasure Type.

  6. Roll on the Wilderness Encounter Distance table (see Wilderness Encounters in Chapter 6) to determine how many yards away the characters are from the creature(s) at the start of the encounter. If the creature is in its lair, the encounter distance is the distance to the lair. If the creature is outside its lair, the encounter distance is the distance to the creature.

  7. Roll for surprise, initiative, and reaction as described in Chapter 6, Wilderness Encounters.

Wilderness Encounters by Terrain

Roll Clear, Grass, Scrub Woods River Swamp Mountains, Hills
1 Men Men Men Men Men
2 Flyer Flyer Flyer Flyer Flyer
3 Humanoid Humanoid Humanoid Humanoid Humanoid
4 Animal Insect Insect Swimmer Unusual
5 Animal Unusual Swimmer Undead Animal
6 Unusual Animal Swimmer Undead Humanoid
7 Dragon Animal Animal Insect Dragon
8 Insect Dragon Dragon Dragon Flyer
Roll Barren, Desert Inhabited City Ocean Jungle
1 Men Men Men Men Men
2 Flyer Flyer Undead Flyer Flyer
3 Humanoid Humanoid Humanoid Swimmer Insect
4 Humanoid Men Men Swimmer Insect
5 Animal Men Men Swimmer Humanoid
6 Dragon Insect Men Swimmer Animal
7 Undead Animal Men Swimmer Animal
8 Unusual Dragon Men Dragon Dragon

Wilderness Encounters: Men

Roll Clear, Grass, Scrub Woods River Swamp Barrens, Mountains, Hills
1 Brigand Brigand Brigand Brigand Brigand
2 Noble Thief* Thief* Thief* Thief*
3 Mage* NPC Party* NPC Party* NPC Party* NPC Party*
4 Fighter* Merchant Merchant NPC Party* Venturer*
5 Thief* Berserker Buccaneer Merchant Berserker
6 Cleric* Brigand Buccaneer Cleric* NPC Party*
7 Nomad Cleric* Cleric* Venturer* Cleric*
8 Thief* Mage* Mage* Berserker Mage*
9 NPC Party* Fighter* Fighter* Fighter* Fighter*
10 Merchant Thief* Merchant Mage* Brigand
11 Berserker Brigand Buccaneer NPC Party* NPC Party*
12 Venturer* NPC Party* NPC Party* Thief* Barbarian*
Roll Desert Inhabited City Ocean Jungle
1 Nomad Thief* Thief* Buccaneer Brigand
2 Nomad Venturer* Venturer* Pirate Venturer*
3 NPC Party* NPC Party NPC Party Merchant Thief*
4 Merchant NPC Party NPC Party NPC Party* NPC Party*
5 Nomad Merchant Merchant Pirate Cleric*
6 Nomad Fighter* Fighter* Merchant Fighter*
7 Cleric* Thief* Merchant Merchant Medium
8 Mage* Fighter* Fighter* Merchant Berserker
9 Fighter* Mage* Mage* Buccaneer Brigand
10 Noble Cleric* Cleric* Pirate Barbarian*
11 Nomad Cleric* Cleric* Merchant NPC Party*
12 Nomad Noble Noble Pirate Brigand

*Determine characteristics using the rules for NPC Parties.

Wilderness Encounters: Humanoid

Roll Clear, Grass, Scrub Woods River Swamp Hills, Mountains
1 Bugbear Bugbear Bugbear Gnoll Dwarf
2 Elf Cyclops Elf Goblin Giant, Cloud
3 Gnoll Dryad Gnoll Hobgoblin Giant, Frost
4 Goblin Elf Hobgoblin Lizard Man Giant, Hill
5 Halfling Giant, Hill Lizard Man Lizard Man Giant, Stone
6 Hobgoblin Gnoll Lizard Man Lizard Man Giant, Storm
7 Kobold Goblin Naiad Naiad Goblin
8 Ogre Hobgoblin Naiad Ogre Kobold
9 Orc Ogre Ogre Orc Ogre
10 Pixie Orc Orc Troglodyte Orc
11 Throghrin Pixie Sprite Troll Troglodyte
12 Troll Troll Troll Troll Troll
Roll Barrens Desert City Inhabited Jungle
1 Bugbear Bugbear Doppelganger Doppelganger Bugbear
2 Giant, Hill Gnoll Dwarf Dwarf Cyclops
3 Goblin Giant, Fire Elf Elf Elf
4 Gnoll Hobgoblin Gnome Gnome Giant, Fire
5 Hobgoblin Hobgoblin Halfling Goblin Giant, Hill
6 Hobgoblin Minotaur Pixie Halfling Gnoll
7 Ogre Ogre Sprite Kobold Goblin
8 Ogre Ogre Werebear Ogre Lizard Man
9 Orc Orc Wereboar Orc Ogre
10 Orc Orc Wererat Pixie Orc
11 Throghrin Troll Weretiger Sprite Troglodyte
12 Troll Troll Werewolf Wererat Troll

Wilderness Encounters: Animal

Roll Clear, Grass, Scrub Woods River Hills Mountains
1 Herd Animal (Antelope) Herd Animal (Antelope) Herd Animal (Antelope) Herd Animal (Antelope) Herd Animal (Antelope)
2 Boar* Bat* Bear, Black Bear, Grizzly Bear, Cave
3 Cat, Lion Bear, Grizzly Boar* Boar* Cat, Mountain Lion
4 Cat, Panther Boar* Cat, Panther Cat, Mountain Lion Eagle*
5 Elephant Cat, Panther Crab, Giant Eagle* Herd Animal (Goat)
6 Hawk* Hawk* Crocodile* Hawk* Hawk*
7 Horse, Light Owl* Leech, Giant Horse, Light Mule (Donkey)
8 Lizard, Tuatara Snake, Pit Viper Piranha, Giant Herd Animal (Sheep) Baboon, Rock
9 Mule (Donkey) Spider, Black Widow Rat* Snake, Pit Viper Snake, Pit Viper
10 Snake, Pit Viper Unicorn Shrew, Giant Owl* Snake, Giant Rattler
11 Snake, Giant Rattler Wolf Swan Wolf Wolf
12 Weasel, Giant Wolf, Dire Toad, Giant Wolf, Dire Wolf, Dire
Roll Barrens Desert Inhabited Jungle Prehistoric
1 Herd Animal (Antelope) Herd Animal (Antelope) Goat Herd Animal (Antelope) Bear, Cave
2 Bear, Cave Herd Animal (Antelope) Boar* Boar* Cat, Sabre-Tooth Tiger
3 Cat, Mountain Lion Camel Dog Cat, Panther Crocodile, Giant
4 Eagle* Camel Ferret, Giant Lizard, Draco Mastodon
5 Goat, Wild Cat, Lion Hawk* Lizard, Gecko Pteranodon
6 Hawk* Hawk* Horse, Light Lizard, Horned Rhino, Woolly
7 Rock Baboon Lizard, Gecko Mule (Donkey) Monkey Snake, Python
8 Snake, Pit Viper Lizard, Tuatara Rat* Shrew, Giant Stegosaurus
9 Snake, Giant Rattler Snake, Giant Rattler Snake, Pit Viper Snake, Pit Viper Titanothere
10 Spider, Crab Wolf (Wild Dog) Herd Animal (Sheep) Snake, Python Triceratops
11 Wolf, Dire Wolf, Dire Weasel, Giant Snake, Spitting Cobra Tyrannosaurus Rex
12 Vulture Vulture Wolf Spider, Crab Wolf, Dire

*Roll 1d6: 1-4 Normal or Swarm, 5-6 Giant

Wilderness Encounters: Flyer

Roll Barrens Desert Mountains Woods Other
1 Cockatrice Chimera Swarm, Bat Bat, Giant Cockatrice
2 Gargoyle Cockatrice Chimera Swarm, Bat Fly, Giant Carnivorous
3 Griffon Gargoyle Cockatrice Cockatrice Gargoyle
4 Harpy Griffon Gargoyle Griffon Griffon
5 Hawk, Giant Hawk, Giant Griffon Hawk, Giant Hawk, Giant
6 Hippogriff Lammasu Harpy Hippogriff Hippogriff
7 Lammasu Manticore Hawk, Giant Pegasus Bee, Killer Giant
8 Manticore Pterodactyl Hippogriff Owl, Giant Pegasus
9 Pegasus Roc, Small Manticore Pixie Pixie
10 Roc, Small Sphinx Pegasus Roc, Small Roc, Small
11 Stirge Wyvern Roc* Sprite Sprite
12 Wyvern Vulture Wyvern Stirge Stirge

*Roll 1d6: 1-3 Small, 4-5 Large, 6 Giant

Wilderness Encounters: Swimmer

Roll River, Lake Ocean Swamp
1 Crab, Giant Dragon Turtle Crab, Giant
2 Crocodile Hydra, Sea Crocodile
3 Crocodile Merman Crocodile, Large
4 Crocodile, Large Octopus, Giant Crocodile, Giant
5 Fish, Catfish Sea Dragon Fish, Catfish
6 Fish, Piranha Sea Serpent Insect Swarm
7 Fish, Sturgeon Shark* Insect Swarm
8 Leech, Giant Shark* Leech, Giant
9 Lizard Man Skittering Maw Leech, Giant
10 Merman Snake, Sea Lizard Man
11 Naiad Squid, Giant Lizard Man
12 Skittering Maw Whale Skittering Maw

*Roll 1d6: 1-2 Bull Shark, 3-4 Mako Shark, 5-6 Great White Shark

Wilderness Encounters: Other

Roll Dragon Insect Undead Unusual
1 Basilisk Beetle, Fire Ghoul Basilisk
2 Caecilian Beetle, Giant Bombardier Ghoul Blink Dog
3 Chimera Beetle, Tiger Mummy Centaur
4 Dragon* Carcass Scavenger Mummy Gorgon
5 Dragon* Centipede, Giant Skeleton Hellhound
6 Sphinx Ant, Giant Skeleton Lycanthrope
7 Hydra/Sea Hydra Fly, Giant Carnivorous Spectre Medusa
8 Lamia Killer Bee Wight Phase Tiger
9 Purple Worm Rhagodessa Wraith Rust Monster
10 Snake, Python Scorpion, Giant Vampire Skittering Maw
11 Salamander Spider, Black Widow Zombie Treant
12 Wyvern Spider, Crab Zombie Ape, White

*Always Black in Swamp, Blue in Mountains, Brown in Desert, Green in Woods, Red in Barrens, Sea in Oceans/Rivers/Lake. Otherwise roll 1d10: 1 Black, 2 Blue, 3 Brown, 4 Green, 5 Metallic, 6 Red, 7 Sea, 8 White, 9 Wyrm, 10 Judge’s Choice.

NPC Parties

Wandering monsters may sometimes include parties of NPC adventures out seeking their own fortunes. To determine the composition of an NPC adventuring party, follow the procedure below, or make them up as needed.

Begin by establishing the number encountered by rolling 1d4+2. Then roll 3d6 on the table below to determine a class for each NPC:

Roll NPC Class
3-4 Elven Nightblade
5 Elven Spellsword
6 Explorer
7 Bladedancer
8 Cleric
9-11 Fighter
12 Thief
13 Mage
14 Assassin
15 Bard
16 Dwarven Vaultguard
17-18 Dwarven Craftpriest
Roll NPC Alignment
1-2 Lawful
3-5 Neutral
6 Chaotic
Roll NPC Level
1 Base level -2 (min. 1)
2 Base level -1 (min. 1)
3-4 Base level
5 Base level +1
6 Base level +2

Once classes are established, roll 1d6 to randomly determine the alignment of the party. All NPCs will either be of this alignment, or within one step of it. For example, a Lawful party may have Lawful and Neutral adventurers.

Level Treasure Type
1 B x1/4
2 B x1/2
3 B x1/2
4 B
5 D x1/2
6 D
7 H
8 J
9 J x2
10 N
11 O
12 N x2
13 Q
14 R

Each NPC party will have a base level, which is the average for the party as a whole. When NPCs are encountered in a dungeon, their base level will be determined by the dungeon level they are encountered on, as shown on the Random Monsters by Level tables. When NPCs are encountered in a wilderness, their base level should be based on the maximum level of the nearest dungeon. When NPCs are encountered in a settlement, their base level is 7, less the settlement’s market class. Once the base level of the party is determined, roll 1d6 on the NPC Level table to determine the level of each NPCs in the party.

If desired, the Judge can replace one or more of the NPCs present with 2 NPCs of the same class but two levels lower. These characters would be henchmen of the higher level characters present in the NPC party.

Example: An NPC party of three characters with a base level of 9 is generated. It includes a 9th level fighter, a 9th level cleric, and an 8th level thief. The Judge decides to replace the 9th level cleric with two 7th level clerics, and decides these are the fighter’s henchmen.

NPCs will carry mundane weapons, armor, and equipment appropriate to their class, level, and terrain. When in the wilderness, they will have a 10% chance of having mounts for each level of experience. NPCs will also carry treasure and magic items. Use the table to the right to determine the treasure carried by each NPC based on his level. However, do not roll against the Treasure Type for magic items. Instead, for each category of item (potion, sword, etc.) the NPC can use, there is a 5% chance per level of the NPC that he possesses a useful item of that category.

Example: To determine a 9th level NPC fighter’s treasure, the Judge rolls against Treasure Type J for coins, gems, and jewelry. Instead of rolling on TT J for magic items, however, there is a flat 45% chance (5% per level) in each category of item that the NPC has a useful item.

Additional Rules for Judges

The following rules cover a variety of circumstances that may arise when a Judge runs a session or campaign of ACKS.

Aging and Death

If the Judge intends to run his campaign over the course of game years, adventurers may grow old and die, so tracking character age becomes relevant. The Character Starting Age table gives a range of starting ages by character class.

Character Starting Age

Class Starting Age Class Starting Age
Assassin 17+1d6 Elven Nightblade 75+5d4
Bard 14+1d8 Elven Spellsword 75+5d4
Bladedancer 17+1d6 Explorer 17+1d6
Cleric 17+1d6 Fighter 15+1d8
Dwarven Craftpriest 25+2d8 Mage 17+3d6
Dwarven Vaultguard 23+3d4 Thief 15+1d8

The Character Aging table shows the lifespan of the human, demi-human, and humanoid races, broken into five age categories (Youth, Adult, Middle Aged, Old, and Ancient). Elves, being ageless, never progress past adult.

Character Aging

Race Youth Adult Middle Aged Old Ancient
Beastman 12-15 16-30 31-45 46-60 61-75
Dwarf 15-25 26-50 51-75 76-115 116-150
Elf 15-50 51-200 - - -
Gnome 15-25 26-62 63-95 96-135 136-175
Human 13-17 18-35 36-55 56-75 76-95
Halfling 14-21 22-42 43-65 66-95 96-125

At each stage, progressively adjust the character’s ability scores as noted on the Ability Score Adjustments by Age table. For characters generated at an already advanced age, the cumulative ability score adjustments appropriate to the character’s age can be used. Ability score adjustments from aging cannot reduce an ability score below a class minimum, and in no case lower than 3.

Ability Score Adjustments by Age

Age Category Progressive Ability Score Adjustments Cumulative Ability Score Adjustments
Youth -2 STR, -2 INT, -2 WIS -2 STR, -2 INT, -2 WIS
Adult +2 STR, +2 INT, +2 WIS No adjustments
Middle Aged -2 STR, -2 DEX, -2 CON -2 STR, -2 DEX, -2 CON
Old -2 STR, -2 DEX, -2 CON, -2 CHA -4 STR, -4 DEX, -4 CON, -2 CHA
Ancient -2 STR, -2 DEX, -2 CON, -2 CHA -6 STR, -6 DEX, -6 CON, -4 CHA

Death from Old Age

Character may die of old age, though this is a rare fate for adventurers! Death from old age is resolved with a saving throw versus Death. Characters must save within 1d12 months of reaching the following ages:

Restore life and limb does not raise characters who have died from old age.

Example: Marcus has CON 18 as an adult. By the time he reaches the Old age category (56), his CON is reduced to 14. He must save versus Death when he reaches (56+14) age 70. He succeeds, so he will not perish due to natural causes just yet. When he reaches the Ancient age category (76), his CON is down to 12. He must save versus Death when he reaches (76+12) age 88. He succeeds again. When Marcus reaches age 95, and each year thereafter, he will have to save versus Death again.

Poisons

As detailed in the Monsters chapter, many monsters have deadly natural poisons. If the Judge permits, other characters or monsters may use poison. Poisons can be acquired from three sources: monster venoms, plant toxins, or magical poisons. At the Judge’s discretion, certain markets may also sell monster venoms, plant toxins, and magical poisons, so gp costs are listed below for each type of poison.

Monster Venoms

Characters with Naturalism proficiency can identify venomous monsters and distinguish their different poisons with a successful proficiency throw of 11+. Extracting venom from a slain monster requires 1 day and a successful Animal Husbandry proficiency throw of 11+. If the character’s proficiency throw to extract venom is an unmodified 1, he has accidentally gotten scratched by a fang or stinger. The character must immediately save versus Poison, as if hit by the monster.

Once extracted, monster venoms can be applied to weapons. Each monster yields one dose of its venom. A dose is enough venom to treat twenty missiles (arrows, bolts, or darts) or one melee weapon. Note that venoms applied to missiles and melee weapons are not as effective as they are when coming from the monster itself. Venomous monsters penetrate their prey’s skin with hollow fangs or tubular stingers, then use muscles attached to their venom reservoirs to forcibly squirt venom deep within the target’s body tissue. In comparison, a sword or arrow is simply a less effective mechanism for delivering poison.

The Monster Venoms table shows the market cost, onset time, save modifier, and effects of monster venoms when applied to missiles and melee weapons.

Monster Venoms

Monster Venoms Cost / Dose Onset Time Save Mod. Effect on Failed Save
Giant Centipede 50gp 1 turn +2 Sickness 1d10 days*
Spitting Cobra 100gp 1 turn +2 1d6 damage
Giant Crab Spider 100gp 1d10 turns +4 1d10 damage
Pit Viper 200gp 1d10 turns +2 1d10 damage
Giant Killer Bee 250gp 1 turn +2 1d10 damage
Carcass Scavenger 250gp 1 turn +2 Paralysis 2d4 turns
Sea Snake 275gp 1d10 turns +2 4d4 damage
Giant Black Widow 300gp 1d6 turns +2 4d4 damage
Giant Rattlesnake 300gp 1d10 turns +2 2d10 damage
Giant Tarantula 350gp 1d6 turns +2 2d10 damage
Giant Scorpion 400gp 1 turn +2 2d10 damage
Rockfish 500gp 1 round +1 4d6 damage
Wyvern 700gp 1 round +1 6d6 damage
Purple Worm 1,500gp Instant - Death
Dragon Blood 1,500gp Instant - Death

*Sickened characters move at 1/2 speed and cannot fight or perform other actions.

Plant Toxins

Characters with Naturalism proficiency can search for a fresh specimen of poisonous plants each week. A successful proficiency throw against the target value for the plant (listed on the Plant Toxins table below) gathers enough fresh plant to extract one dose of toxin. Dried belladonna and wolfsbane can be easily found in most markets, but are more difficult to extract useful toxin from.

Extracting the toxin from the raw plant takes 1 week per plant and requires a successful Alchemy proficiency throw of 14+ for fresh plants and 17+ for dried plants. If either the proficiency throw to gather the plant, or to extract the plant toxin, is an unmodified 1, the character has accidentally exposed himself to the toxin. The character must immediately save versus Poison or suffer its effects.

Each plant yields one dose of its toxin. Some plant toxins can be used to treat weapons. For these toxins, a dose is enough to treat twenty missiles (arrows, bolts, or darts) or one melee weapon. Other toxins can be used to poison food or drink. In this case, one dose is enough to poison one meal or drink. Extracted plant toxins generally cannot be detected by smell or taste. The Plant Toxins table shows the market cost, onset time, save modifier of the various plant toxins.

Plant Toxins

Plant Toxins Naturalism Throw Cost / Dose Onset Time Save Mod. Effect on Failed Save
Belladonna 11+ 350gp 1 turn (injury), 1d3 turns (ingestion) +2 2d8 damage and confusion 1d4 turns
Curare 20+ 1,500gp Instant (injury) - 2d12 damage and paralysis 2d4 turns
Foxglove 14+ 275gp 1d6 turns (ingestion) -3 2d8 damage and confusion 1d4 turns
Hellebore 8+ 225gp 1 turn (injury), 1d3 turns (ingestion) +2 1d6 damage and sickness 1d10 days*
Hemlock 8+ 225gp 2d4 turns (ingestion) +4 2d12 damage and sickness 1d10 days*
Henbane 8+ 350gp 1 turn (injury), 1d6 turns (ingestion) +2 1d6 damage and feeblemind 1d4 hours
Wolfsbane 11+ 350gp 1 turn (injury), 2d4 turns (ingestion) +2 2d8 damage and paralysis 2d4 turns
Yew 4+ 200gp 1 hour (injury), 1d6 hours (ingestion) +4 1d10 damage

*Sickened characters move at 1/2 speed and cannot fight or perform other actions.

Magical Poisons

Magical poisons are created using the rules for magic research in Chapter 7. The most common magical poison is a poison potion, created using the 4th level reversed divine spell poison. A single poison potion can treat twenty missiles (arrows, bolts, or darts) or one melee weapon. A weapon treated with magical poison kills instantly unless the victim makes a successful saving throw versus Poison. Magical poison is also fatal if ingested.

Use of Poison

Once applied, poison evaporates quickly, diminishing its effectiveness. On the first day, it will do full damage, on the second day half damage, and by the third it will be gone. Partially evaporated deadly poisons allow the victim a +2 bonus on his saving throw after the first day, and +4 after the second. Each hit with a melee weapon is equivalent to a day’s evaporation, e.g. the poison will do half damage on its second hit and then be gone.

Using poisoned weapons is not without risk. Whenever a character’s attack throw with a poisoned weapon is an unmodified 1, he has accidentally pricked himself. He must immediately save versus Poison or suffer its effects.

Slavery

Slavery was an all too common feature in ancient societies. Slaves might be indentured debtors, convicted criminals, or prisoners of war. The abundant supply of slave labor was a major component to most ancient economies, and the mass enslavement of defeated peoples was justified as more merciful than the alternative of slaughtering them. Should the Judge wish to incorporate slavery into his campaign, the following rules will apply.

Types of Slaves

Slaves are divided into 5 types: Slave laborers, slave soldiers, household slaves, pleasure slaves, and professional slaves.

Slave laborers do manual work, usually of the most unpleasant sort, such as farming on plantations, mining ore, or building pyramids. Slave laborers can be bought in markets at a cost of 40gp each. Slave laborers are generally able-bodied males captured in war or slaving expeditions. Individually, slave laborers can be used for any labor-related tasks. They cost 2gp each per month in upkeep and have morale scores of -4. When used on a domain, treat every 5 slave laborers as equivalent to one peasant family for all purposes. If a domain’s population consists of 25% or more slave laborers, its domain morale is decreased by 1. If a domain’s population consists of 50% or more slave laborers, its domain morale is decreased by 2. If the domain is 100% slave labor, domain morale is decreased by 4. Historical examples include the helots of Sparta and the plantation slaves of Rome.

Slave soldiers are usually either born into slavery or enslaved in early childhood so they can be indoctrinated with loyalty to their ruler or owner. Historical examples include the Persian ghulam, Egyptian mamelukes, and Turkish janissaries. In realms where they exist (Judge’s discretion), slave soldiers can be bought in markets at a variable cost depending on their race, training and equipment, as noted on the Slave Troop Type table.

Slave Troop Type

(Gp Cost per Slave)

Slave Troop Type Man Dwarf Elf Goblin Orc
Militia (spear) 40 - - - -
Light Infantry (3 javelins, short sword, shield, leather armor) 215 - 315 85 185
Heavy Infantry (spear, sword, shield, banded plate armor) 415 650 800 - 285
Slingers (sling, short sword, shield, leather armor) 185 - - 85 -
Bowman (short bow, short sword, leather armor) 275 - 650 85 175
Crossbowmen (arbalest, short sword, chainmail) 600 750 - - 415
Longbowmen (long bow, sword, chainmail) 650 - 1,400 - -
Light Cavalry (3 javelins, sword, shield, leather armor, light warhorse) 1,150 - 2,150 - -
Mounted Crossbowman (crossbow, short sword, chainmail, mule) - 1,575 - - -
Horse Archers (composite bow, scimitar, leather armor, light warhorse) 1,700 - 3,200 - -
Medium Cavalry (lance, sword, shield, lamellar, medium warhorse) 1,800 - - - -
Heavy Cavalry (lance, sword, shield, plate armor, chain barded medium warhorse) 2,500 - - - -
Cataphract Cavalry (composite bow, sword, shield, plate, chain barded medium warhorse) 3,125 - 5,250 - -
Beast Riders (spear, short sword, shield, leather or scale armor, dire wolf or giant boar) - - - 1,200 -

Slave soldiers enslaved as children have the same morale scores as normal mercenaries of their type. Slave soldiers enslaved as adults have morale scores of -4 (and are a very bad idea). All slave soldiers cost 3gp per month in upkeep. Supplemental pay, better food, access to women, and so on can increase morale.

Household slaves perform domestic chores such as cleaning, cooking, shopping, etc. Household slaves tend to live and work for their owners for long periods of time, and can be fairly loyal if treated well. Historical examples include Greek and Roman household slaves. Household slaves can be bought in markets at a cost of 100gp each, and cost 3gp per month in upkeep.

Pleasure slaves are young and attractive slaves specially trained in the arts of seduction, performance, and pleasure. Historical examples include the Greek hetaera (courtesan) and Ottoman odalisque (harem slaves). Pleasure slaves usually have 1 or more ranks in Seduction, Performance (dance), or Labor (massage). Pleasure slaves can be bought in markets at a cost of 100gp to 1,000gp, depending on age, beauty, and level of training. Truly exceptional pleasure slaves can command virtually unlimited prices. All pleasure slaves cost 12gp per month in upkeep.

Professional slaves are trained experts such as scribes, tutors, or accountants. In general, the cost of a professional slave is equal to 33 times a free professional’s wages per month, less 36gp. For example, a master blacksmith earns 40gp per month. Purchasing a master blacksmith slave would cost 1,284gp. All professional slaves cost 3gp per month in upkeep.

Household slaves, pleasure slaves, and professional slaves all have base morale scores of -2. Better working conditions, kind treatment, gifts, or extended liberties can increase morale (Judge’s discretion).

Sinkholes of Evil

Some campaigns feature places that are corrupted by the energies of the Nether Darkness. In ACKS these are known as sinkholes of evil. Profane powers and undead creatures are stronger there, while the divine and the living are weakened. Sinkholes of evil can develop anywhere that death and decay predominate. Sinkholes of evil can be shadowed, blighted, or forsaken. The table below summarizes the effects of the various types of sinkholes of evil.

Sinkholes of Evil

Effect Shadowed Blighted Forsaken
Corpse Reanimation 10%/1d12 months 20%/1d4 days 80%/1d4 rounds
Reversed/necromantic spell effects +2 class levels +2 class levels +2 class level
Lawful divine spell effects No Effect No Effect -2 class levels
Turning Undead No Effect -4 class levels Forbidden
Necromancy magic research +1 bonus +2 bonus +3 bonus
Undead in Sinkhole No Effect No Effect +2 attack, save, damage, AC
Animating Undead No Effect No Effect +2 hp/HD, 2x normal HD created
Blood sacrifice Yes Yes Yes

Shadowed Sinkholes

Shadowed sinkholes develop from two sources of corruption: Chaotic altars (such as those in evil shrines, temples, or churches) and places of death (such as cemeteries, catacombs, and battlegrounds).

Chaotic altars create shadowed sinkholes as soon as they are erected. The size of the shadowed sinkhole around the altar will be 100 square feet per 100gp spent on the altar. For instance, a 10,000gp altar would create a 100’ x 100’ shadowed sinkhole around the altar. At the Judge’s discretion, meeting the gp value of the altar might require special components or blood sacrifices (as described in Chapter 7 under Magical Research) instead of standard treasure.

Places of death create shadowed sinkholes naturally over time. The annual percentage chance of such an area becoming shadowed is equal to number of dead interred in the area divided by the area’s size in square feet, rounded up. For instance, a small 50’ x 50’ cemetery with 25 graves has a 1% chance of becoming shadowed each year. An enormous cemetery such as the real-world Wadi Al Salam (5 million dead across 64 million square feet) has an 8% chance of becoming shadowed each year. Once the shadowed sinkhole develops, the size of the shadowed sinkhole will be 100 square feet per 20 dead interred in the place. However, a sinkhole of evil will not develop if the dead are cremated by a Lawful divine spellcaster, or if one or more shrine(s) to Lawful powers are erected on the site. The Lawful shrine(s) must have a gp value of at least 5gp per dead interred in order to prevent the area from becoming shadowed.

Corpses in shadowed sinkholes have a 10% chance to return as undead in 1d12 months unless their bodies are burned. Chaotic spellcasters who cast reversed (evil) divine spells or necromantic spells (such as animate dead or death spell) in a shadowed sinkhole calculate the spell effects as if the casters were two class levels higher than their actual level of experience. Characters performing necromancy (described in Chapter 7) in a shadowed sinkhole gain a +1 bonus to their magic research throws. A shadowed sinkhole can also be used for blood sacrifice (described in Chapter 7).

Blighted Sinkholes

When a chaotic altar stands on a shadowed place of death, a blighted sinkhole develops. The blighted sinkhole will extend only within those regions that are shadowed by both the altar and the place of death. An area affected by one, but not both, sources of corruption is merely shadowed.

Corpses in blighted sinkholes have a 20% chance to return as undead in 1d4 days unless their bodies are burned. Chaotic spellcasters who cast reversed (evil) divine spells or necromantic spells in a blighted sinkhole calculate the spell effects as if the casters were two class levels higher than their actual level of experience. Divine spellcasters of lawful alignment turn undead as if four class levels lower. Characters performing necromancy in a blighted sinkhole gain a +2 bonus to their magic research throws. A blighted sinkhole can be used for blood sacrifice.

Forsaken Sinkholes

A blighted area might, through some awful juxtaposition of the planes or terrible ritual magic, become forsaken. Forsaken sinkholes are pits of darkness where the vilest creatures and foulest magic are found. Such places are very rare (Judge’s discretion).

Corpses in forsaken areas have an 80% chance to return as undead in 1d4 rounds unless their bodies are burned. Chaotic spellcasters who cast reversed (evil) divine spells or necromantic spells in a forsaken sinkhole calculate the spell effects as if the casters were two class levels higher than their actual level of experience. Lawful divine spellcasters cast spells as if they were two class levels lower for purposes of spell effects, and may not turn undead. Any undead in forsaken areas gain a +2 bonus to attack throws, saving throws, damage rolls, and AC. Characters performing necromancy (described in Chapter 7) in a blighted sinkhole gain a +3 bonus to their magic research throws. Any undead created in forsaken areas gain a permanent +2 hit point per Hit Die, and animate dead spells cast in forsaken sinkholes create twice the normal number of Hit Dice of undead. A forsaken sinkhole can be used for blood sacrifice.

Cleansing Sinkholes

A bless spell will temporarily decrease the effect of a sinkhole within a 100’ diameter area for the duration of the spell. While subject to bless, the affected area is cleansed if shadowed; shadowed if blighted; and blighted if forsaken. A vial of holy water can be sprinkled on a 10’ diameter area with the same effect as a bless spell.

To permanently cleanse a sinkhole of evil, the source of corruption must be removed. If the sinkhole is being generated by a chaotic altar, the altar must be destroyed. A chaotic altar can be destroyed magically, with dispel evil; or destroyed physically by smashing it and then either pouring holy water or casting bless on the broken remains. This will remove the sinkhole created by the altar.

If the sinkhole is generated by a place of death, the sinkhole can be instantly cleansed with dispel evil. However, the area will eventually become shadowed again over time. To permanently cleanse a sinkhole created by a place of death, a Lawful divine spellcaster must cremate the dead interred therein, or erect a shrine to the Lawful powers of appropriate value.

Cleansing a blighted sinkhole, with a chaotic altar standing on a place of death, requires that both sources of corruption be dealt with separately.

A forsaken sinkhole can only be cleansed by ritual magic. As such areas develop very rarely, the magic to cleanse them is almost always forgotten in between each such occurrence, and must be researched anew by the forces of Law.

Transformations

In some circumstances, e.g. infection with lycanthropy, magical crossbreeding, or necromantic ritual, an adventurer may be transformed into an intelligent monster. With the Judge’s permission, the player may continue to play his character in its new form. The Judge must determine the character’s new alignment based on the context of the transformation; generally transformed characters will adopt the alignment of their new form, unless they are exceptionally strong willed or purposeful. The transformed character gains all the abilities associated with its new monstrous form, including forms of movement and speeds, natural armor, natural attacks, extraordinary abilities, and the like. If the monster’s Hit Dice are below the character’s former class level, its Hit Dice should be increased to the character’s former class level. A character transformed into a monster may increase in HD through adventuring. It requires 3,000xp plus 500xp per special ability (*) for a 1 HD monster to advance to 2 HD. The amount of XP required doubles with each HD (round values greater than 20,000xp to the nearest 1,000).

In most circumstances, the transformed character loses all his class abilities. At the Judge’s discretion, spellcasters transformed into intelligent monsters may retain their spellcasting abilities. If so, divine spellcasting counts as one special ability (*) and arcane spellcasting counts as two special abilities (**). As his Hit Dice increase, the transformed character’s spellcasting abilities will increase based on his prior class’s progression, subject to the class’s maximum level.

Example: Quintus, a 7th level mage, is the victim of a necromantic ritual that transforms him into a mummy. He gains the mummy’s movement, armor class, attacks, damage, and special abilities, including mummy rot, immunities, and fearsome aura. A mummy has only 5+1 HD, which is below Quintus’s class level. Therefore his Hit Dice are raised to 7. The Judge rules that Quintus retains his arcane spellcasting abilities. This counts as two special abilities. A mummy’s powers are considered one special ability (), so Quintus is considered to have three special abilities total, or 7 HD**. The Judge counts the XP progression for advancement (2 HD at 4,500, 3 HD at 9,000, 4 HD at 18,000, 5 HD at 36,000, 6 HD at 72,000, 7 HD at 144,000, 8 HD at 288,000). Quintus will need 288,000 to reach level 8.

Playing with Advanced Characters

Because of the many options that ACKS offers for high-level play, some Judges may wish to begin their campaigns with the player characters already at an advanced level of experience. The following guidelines are suggested for campaigns where the players begin the game with advanced characters.

Tiers

Advanced characters may begin as adventurers (4th-6th level characters); conquerors (7th-10th level characters); or kings (11th or higher level characters). Adventurer tier is suitable for action and exploration oriented campaigns with experienced players who don’t need to learn the game by starting at 1st level. Conqueror tier is appropriate for campaigns focused on establishing and expanding new domains. King tier is appropriate for campaigns where the characters manage vast realms and fight wars.

Ability Scores and Hit Points

To generate ability scores for adventurers, roll 3d6 in order five times, then choose one of the five sets of rolls as the character’s ability scores. Conquerors roll as above, but may re-roll any one ability score and use the new roll if desired. Kings roll as above, but may re-roll any two ability scores and use the new rolls if desired.

Starting Experience Points

All advanced characters in the campaign begin with a fixed number of experience points, applied to whichever class they choose. Adventurers begin with 20,000XP. This will put elven spellswords at 4th level, thieves at 6th level, and most other characters at 5th level.

Conquerors begin with 310,00XP. This will put elven spellswords at 8th level, clerics and thieves at 10th level and most other classes at 9th level.

Kings begin with 620,000XP. Most racial character classes will be at or near maximum level. Mages will be 11th level, clerics and thieves will be 13th level, and most other classes will be 12th level.

Class and Level

Advanced characters can choose any class they qualify for. They begin at a level determined by their starting experience points. Advanced characters get maximum hit points for their first level and roll normally for their remaining Hit Dice.

Proficiencies and Spells Repertoire

All advanced characters being play knowing any proficiencies they qualify for based on their class, level, and Intelligence score.

Mages, elven nightblades, and elven spellswords begin play with the maximum number of spells in their repertoire. Adventurers should roll randomly to determine which spells are in their repertoire. Conquerors may choose 1/2 the spells and roll randomly for the remainder. Kings may choose which spells are in their repertoire.

Starting Wealth

All advanced characters begin with a fixed amount of starting wealth. Adventurers begin with 16,000gp. Conquerors begin with 240,000gp. Kings begin with 815,000gp. Starting wealth can be spent to:

Any remaining starting wealth can be converted into coin, gems, or jewels, as desired.

Magic Items

The actual magic items can be randomly determined or chosen by the Judge. Re-roll cursed items. Characters capable of magic research may substitute magic item formulas for actual magic items at a 2:1 ratio. For instance, 1d4 random potions could be traded in for 2d4 potion formulas.

Recruiting Hirelings

Advanced characters may begin with hirelings, including henchmen, specialists, and mercenaries.

The advanced character may have as many henchmen as desired, subject to the limits of their Charisma score. The henchman can be of any desired class or level, but the advanced character must spend gp equal to the henchman’s experience points. The henchman’s equipment and magic items must be provided by the advanced character.

Advanced characters may also begin play with specialists and mercenaries in his employ. For each specialist or mercenary, the advanced character must spend gp equal to six month’s wages for the hirelings. This represents past costs incurred in having the hireling on retainer.

Domains

Conqueror tier characters of 9th level or greater that use their starting wealth to build a stronghold begin play with a domain. Create the domain as if the character’s stronghold had just been completed, rolling for starting land value, peasant families, and followers. If the character builds a hideout, his syndicate will have the standard number of followers (2d6 1st level characters of his own class, plus an additional 1d6 per level the syndicate boss has advanced past 9th). If the character builds a sanctum, he will have the standard number of apprentices and normal men (1d6 and 2d6 respectively). Any dungeons built by conqueror level characters begin empty.

King tier characters that use their starting wealth to build a stronghold will begin play with a realm. The realm will include a personal domain and several vassal realms. The king tier character’s personal domain will have the maximum number of families permitted given the size of his stronghold. The king tier character’s realm will include a number of vassal realms equal to the character’s number of henchmen. Each vassal realm should normally be the equivalent of a duchy (as defined in Constructing the Campaign Setting, in this chapter), but the Judge can alter this if he desires a grander or narrower scope.

King tier thieves, assassins, and elven nightblades who build a hideout begin with a syndicate of the maximum size permitted for their location and hideout. If they have thief, assassin, or nightblade henchmen of 9th level or higher, they may build a hideout for these henchman and establish a criminal guild. Syndicates within the guild will have 2d6 members each.

King tier mages who build a sanctum begin with 6 3rd level mage apprentices and 12 normal men. If they build a dungeon, it should be populated until full.

The Judge may determine the starting location of any strongholds, domains, and realms, or allow the characters to select locations on the regional map.

Adventurers, Conquerors, and Kings

A Judge who wishes to embrace every facet of the Adventurer Conqueror King System can allow the players to act at all tiers simultaneously. In such a campaign, each player has one king tier character - a powerful archmage, mighty warlord, or similar persona. Each king in turn has one or more henchmen at the conqueror tier of play. These conqueror tier characters in turn have adventurer tier characters as their own henchmen. In such a campaign, the players will be simultaneously running one or more kingdoms, ruling the duchies and baronies in the kingdoms, and playing the adventuring parties that assist these rulers in dealing with the local threats of monsters and chaotic forces. Depending on the group’s preferences, each session they can focus on a different tier of play, or they can shift between tiers within one game session.

Anderson, Poul. The Broken Sword; Three Hearts and Three Lions; The High Crusade; The Merman’s Children.

Baker, Kage. Anvil of the World and its sequels.

Bakker, R. Scott. “The Prince of Nothing” trilogy; “The Aspect-Emperor” trilogy.

Brust, Steven. “The Book of Jhereg” series.

Chabon, Michael. Gentlemen of the Road.

Cook, Glen. “The Black Company” series; “An Empire Unacquainted with Defeat” series; “Tyranny of the Night” series.

Erikson, Steven. “Malazan Book of the Fallen” series.

Fox, Robin Lane. Alexander the Great.

Gemmell, David. “The Drenai Saga” series; “The Rigante” series.

Heaney, Seamus, transl. Beowulf: A New Translation.

Homer and Hammon, Martin, transl. The Iliad: A New Prose Translation.

Howard, Madeline. “The Rune of Unmaking” series.

Howard, Robert E. “Conan” series.

Jones, J.V. “Sword of Shadow” series.

Kay, Guy Gavriel. “Sarantine Mosaic” series; The Lions of Al-Rassan, The Last Light of the Sun, Tigana, Under Heaven.

LeGuin, Ursula. “Earthsea Cycle”.

Leiber, Fritz. “Fafhrd and Grey Mouser” series.

Lovecraft, H.P. “Mythos” novels and stories.

Lynch, Scott. “The Gentlemen Bastard” series.

Martin, George R.R. “A Song of Ice and Fire” series.

Moon, Elizabeth. The Deed of Paksenarrion.

Moorcock, Michael. “Elric” series; “Hawkmoon” series.

Polybius. The Rise of the Roman Empire.

Pressfield, Steven. Gates of Fire.

Renault, Mary. Fire from Heaven, Funeral Games, The Last of the Wine, The Persian Boy.

Tolkien, J.R.R. “The Lord of the Rings” series; The Silmarillion; The Children of Hurin

Vance, Jack. “Dying Earth” stories.

Williams, Tad. Memory, Sorrow, and Thorn.

Previous Top Next

{% endblock %}